Model : 221B03 | Force Sensor, ICP®

Click for lead times
link icp® quartz force sensor, 500 lb comp., 500 lb tension, 10 mv/lb
Add to Cart for Quote

Link ICP® quartz force sensor, 500 lb comp., 500 lb tension, 10 mV/lb

  • Measurement Range: 500 lb ( 2.224 kN)
  • Sensitivity: (±15%)10 mV/lb ( 2248.2 mV/kN)
  • Low Frequency Response: (-5%)0.002 Hz
  • Upper Frequency Limit: 15000 Hz
  • Temperature Range: -65 to +250 °F ( -54 to +121 °C)
  • Mounting Thread: 1/4-28 Female

RELATED PRODUCTS



410C01
410C01

ICP® sensor signal cond., 35mm DIN-rail mount, peak track hold and waveform analog output, AC/DC coupling, gain, setup configurable via USB or Ethernet communications.



Add to Cart for Quote
Add to Cart
002C10
002C10

General purpose coaxial cable, white FEP jacket, 10-ft, 10-32 plug to BNC plug



Add to Cart for Quote
Add to Cart
081A06
081A06

Mounting stud, 1/4-28 to 1/4-28 thds x 0.365", no shoulder



Add to Cart for Quote
Add to Cart
201B03
201B03

ICP® quartz force ring, 500 lb comp., 10 mV/lb



Add to Cart for Quote
Add to Cart
English: SI:
Performance
Sensitivity (±15 %) 10 mV/lb 2248.2 mV/kN
Measurement Range (Compression) 500 lb 2.224 kN
Measurement Range (Tension) 500 lb 2.224 kN
Maximum Static Force (Compression) 3000 lb 13.34 kN
Maximum Static Force (Tension) 1000 lb 4.448 kN
Broadband Resolution (1) 0.01 lb-rms 0.04448 N-rms [ 2]
Low Frequency Response (-5 %) 0.002 Hz 0.002 Hz [ 3]
Upper Frequency Limit 15000 Hz 15000 Hz [ 4]
Non-Linearity ≤1.5 % FS ≤1.5 % FS [ 1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Electrical
Discharge Time Constant (at room temp) ≥400 sec ≥400 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Output Polarity (Compression) Positive Positive
Physical
Stiffness 2 lb/µin 0.35 kN/µm [ 2]
Size - Diameter 0.65 in 16.51 mm
Size - Height 1.25 in 31.75 mm
Weight 1.1 oz 31 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
Mounting Thread 1/4-28 Female 1/4-28 Female
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] Zero-based, least-squares, straight line method.
[ 2] Typical.
[ 3] Calculated from discharge time constant.
[ 4] Estimated using rigid body dynamics calculations.
[ 2] Typical.
[ 5] See PCB Declaration of Conformance PS023 for details.


Accessories


Optional
081A06 Mounting stud, 1/4-28 to 1/4-28 thds x 0.365", no shoulder 1


Optional Versions


( M ) Metric Mount


( N ) Negative Output Polarity


( W ) Water Resistant Cable
English SI
Electrical Connection Position Side
Electrical Connector Sealed Cable