Force ring, 80k lb comp., 18 pC/lb, charge output
- Sensitivity: (±15%)18 pC/lb
(4047 pC/kN)
- Upper Frequency Limit: 40 kHz
- Temperature Range: -100 to +400 °F
(-73 to +204 °C)
- Weight: 5.48 oz
(155 gm)
|
English: |
SI: |
|
Performance |
Sensitivity (±15 %) |
18 pC/lb |
4047 pC/kN |
|
Measurement Range (Compression) |
≤80000 lb |
≤355.86 kN |
|
Maximum Static Force (Compression) |
90000 lb |
400.32 kN |
|
Upper Frequency Limit |
40 kHz |
40 kHz |
[2]
[3]
|
Non-Linearity |
≤1.25 % FS |
≤1.25 % FS |
[1]
|
Environmental |
Temperature Range |
-100 to +400 °F |
-73 to +204 °C |
|
Temperature Coefficient of Sensitivity |
≤0.03 %/°F |
≤0.054 %/°C |
|
Electrical |
Capacitance |
80 pF |
80 pF |
[4]
|
Insulation Resistance |
≥1E12 |
≥1E12 |
|
Output Polarity (Compression) |
Negative |
Negative |
|
Physical |
Preload |
16000 lb |
71.172 kN |
|
Stiffness |
74 lb/µin |
13 kN/µm |
[4]
|
Size - Diameter |
2.05 in |
52.9 mm |
|
Size - Height |
0.590 in |
15 mm |
|
Size - Bolt Diameter |
1 in |
26 mm |
|
Size - ID (Hole Diameter) |
1.025 in |
26.04 mm |
|
Size - OD (Sensor) |
2.05 in |
52 mm |
|
Size - Sensing Surface |
1.750 in |
44.5 mm |
|
Weight |
5.48 oz |
155 gm |
|
Housing Material |
Stainless Steel |
Stainless Steel |
|
Sealing |
Hermetic |
Hermetic |
|
Electrical Connector |
10-32 Coaxial Jack |
10-32 Coaxial Jack |
|
Electrical Connection Position |
Side |
Side |
|
* All specifications are at room temperature unless otherwise specified
.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Estimated using rigid body dynamics calculations.
[3] Low frequency response and system noise dependent on choice of external signal conditioning electronics.
[4] Typical.
Accessories
|
|
|
Supplied |
080A82 |
Assembly lubricant (for Series 201-207 force rings) |
1 |
081A16 |
Mounting stud, 7/8-14 x 1.900", BeCu (for Models 206C & 216B) |
1 |
082B06 |
Anti-friction washer (for Models 206C, 216B, 260A03, 260A13, & 260A33) |
1 |
083B06 |
Pilot bushing (for Models 206C & 216B) |
1 |
Optional Versions
( M ) Metric Mount
Accessories: |
Supplied |
M083B06 |
Pilot Bushing |
0 |
Supplied |
080A82 |
Accessory for Force - Torque Division Product |
0 |
Supplied |
082B06 |
Anti-Friction Washer |
0 |
Supplied |
M081A16 |
Mounting Stud, M22 x 2.00 x 1.900, BeCu |
0 |
( P ) Positive Output Polarity
( W ) Water Resistant Cable
Electrical Connector |
Molded Integral Cable |
Electrical Connection Position |
Side |