Model : 208C01 | ICP® Force Sensor

Click for lead times
Lead Time for 1-10 is 2 Wks
Lead Time for 11-20 is 3 Wks
$ 430.00 USD
(Pricing valid in US only!)

Platinum Stock Products; Multi-purpose, ICP® force sensor, 10 lb comp., 10 lb tension, 500 mV/lb

  • Measurement Range: 10 lb (0.04448 kN)
  • Sensitivity: (±15%)500 mV/lb (112410 mV/kN)
  • Low Frequency Response: (-5%)0.01 Hz
  • Upper Frequency Limit: 36000 Hz
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Mounting Thread: 10-32 Female

RELATED PRODUCTS



410C01

ICP® sensor signal cond., 35mm DIN-rail mount, peak track hold and waveform analog output, AC/DC coupling, gain, setup configurable via USB or Ethernet communications.



Add to Cart for Quote
Add To Cart
002C10

General purpose coaxial cable, white FEP jacket, 10-ft, 10-32 plug to BNC plug



Add to Cart for Quote
Add To Cart
084A03

Impact cap, convex (for Series 208)



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Sensitivity (±15 %) 500 mV/lb 112410 mV/kN
Measurement Range (Compression) 10 lb 0.04448 kN
Measurement Range (Tension) 10 lb 0.04448 kN
Maximum Static Force (Compression) 60 lb 0.27 kN
Maximum Static Force (Tension) 60 lb 0.27 kN
Broadband Resolution (1) 0.0001 lb-rms 0.00045 N-rms [2]
Low Frequency Response (-5 %) 0.01 Hz 0.01 Hz [3]
Upper Frequency Limit 36000 Hz 36000 Hz [4]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.09 %/°C
Electrical
Discharge Time Constant (at room temp) ≥50 sec ≥50 sec
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC [5]
Spectral Noise (1 Hz) 0.0000126 lb/√Hz 0.0000562 N/√Hz [2]
Spectral Noise (10 Hz) 0.00000424 lb/√Hz 0.0000189 N√Hz [2]
Spectral Noise (100 Hz) 0.00000149 lb/√Hz 0.00000665 N/√Hz [2]
Spectral Noise (1000 Hz) 0.000000522 lb/√Hz 0.00000233 N/√Hz [2]
Output Polarity (Compression) Positive Positive
Physical
Stiffness 6 lb/µin 1.05 kN/µm [2]
Size - Hex 0.625 in 15.88 mm
Size - Height 0.625 in 15.88 mm
Size - Sensing Surface 0.500 in 12.7 mm
Weight 0.80 oz 22.7 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
Mounting Thread 10-32 Female 10-32 Female
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] Sensor contains protected electronics which may cause long 'turn-on" times.
[2] Typical.
[6] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
080A81 Thread lock adhesive (for Series 200) 1
084A03 Impact cap, convex (for Series 208) 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 2
M081A62 Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu 2


Optional Versions


( N ) Negative Output Polarity


( W ) Water Resistant Cable