Model : 1630-06C | STRAIN GAGE LOAD CELL

Click for lead times
Lead Time for 1-1 is 2 Wks
Lead Time for 0-0 is 0 Wks
$ 463.50 USD
(Pricing valid in US only!)

PCB L&T S-Type Load Cell, 250 lbf rated capacity, 150% of RO static overload protection, 2mV/V output, 1/4-28 UNF threads, integral 10 ft cable w/ open end, aluminum construction

  • Measurement Range: 250 lb (1112 N)
  • Size - Height: 2.50 in (64 mm)
  • Electrical Connector: 10 ft - Integrated Cable
English: SI:
Performance
Measurement Range 250 lb 1112 N [1]
Sensitivity (±10 %) 2 mV/V 2 mV/V [2]
Non-Linearity ≤0.05 % FS ≤0.05 % FS
Hysteresis ≤0.03 % FS ≤0.03 % FS
Non-Repeatability ≤0.02 %RO ≤0.02 %RO
Creep (in 20 minutes) ≤0.08 % ≤0.08 %
Resonant Frequency 2.2 kHz 2.2 kHz
Environmental
Overload Limit 375 lb 1668 N
Load Limit (Side Force, FX or FY) 25 lb 111.2 N [3]
Load Limit (Bending Moment, MX or MY) 50 in-lb 5.6 Nm [3]
Load Limit (Axial Torque, MZ) 50 in-lb 5.6 Nm [3]
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.0008 %Reading/°F ±0.0015 %Reading/°C [4]
Temperature Effect on Zero Balance (Maximum) ±0.0015 %FS/°F ±0.027 %FS/°C [4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [5]
Excitation Voltage (Recommended) 10 VDC 10 VDC [6]
Insulation Resistance >5000000000 Ohm >5000000000 Ohm
Zero Balance ±1 % FS ±1 % FS
Physical
Size - Height 2.50 in 64 mm [7]
Size - Width 0.625 in 16 mm [7]
Size - Length 2.00 in 51 mm [7]
Weight 0.23 lb 104 g
Mounting Thread 1/4-28 thread No Metric Equivalent
Housing Material Aluminum Aluminum
Sensing Element Strain Gage Strain Gage
Deflection at Full Scale Capacity 0.0025 in 0.05 mm
Electrical Connector 10 ft - Integrated Cable 10 ft - Integrated Cable
Electrical Connection Position Side Side
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 46137 for Complete Dimensions