Model: 1403-05ADB

Add to Cart for Quote

Dual bridge load cell, fatigue rated low profile, 5k lb FS, 5/8-18 (F) thd, PT conn.

Specifically designed for airframe structural, lifetime and fatigue testing applications on wings, fuselage, landing gear, iron bird and other airframe components.•Series 1400 includes a dual output feature that offers sensor redundancy and the ability to provide control feedback from one output while the other is used for data acquisition•A2LA accredited calibration to ISO 17025 in both tension and compression directions•Fatigue rated load cells are guaranteed for 100 million fully-reversed cycles•Thermally compensated•Moment compensated•A single shunt calibration resistor is provided with each load cell for ease of calibration at the test site

  • Measurement Range: 5000 lb (22 kN)
  • Size - Diameter: 4.12 in (104.60 mm)
  • Size - Height: 2.50 in (63.50 mm)
  • Electrical Connector: PT02E-10-6P (2)

Add this product to my product comparison
Compare selected models ()

Measurement Range (100 x 10^6 cycles)5000 lb22 kN[2][4] 
Sensitivity (±10 %)2.0 mV/V2.0 mV/V[1][3] 
Non-Linearity≤0.04 % FS≤0.04 % FS 
Hysteresis≤0.04 % FS≤0.04 % FS 
Non-Repeatability≤0.02 %RO≤0.02 %RO 
Creep (in 20 minutes)0.025 %0.025 % 
Static Error Band≤0.04 % FS≤0.04 % FS[2] 
Eccentric Load Sensitivity0.1 %/in0.1 %/25.4mm 
Resonant Frequency10 kHz10 kHz 
Side Load Sensitivity0.1 %/in0.1 %/25.4mm 
Overload Limit15 klb67 kN 
Load Limit (Side Force, FX or FY)5000 lb22 kN[5] 
Load Limit (Bending Moment, MX or MY)5000 in-lb565 Nm[5] 
Load Limit (Axial Torque, MZ)5000 in-lb565 Nm[5] 
Temperature Range (Operating)-65 to +200 °F-54 to +93 °C 
Temperature Range (Compensated)+15 to +115 °F-9 to +46 °C 
Temperature Effect on Output (Maximum)±0.0008 %Reading/°F±0.0018 %Reading/°C[6] 
Temperature Effect on Zero Balance (Maximum)±0.0008 %FS/°F±0.0018 %FS/°C[6] 
Bridge Resistance350 Ohm350 Ohm[1] 
Excitation Voltage (Recommended)10 VDC10 VDC[7] 
Insulation Resistance>5k GOhm>5k GOhm 
Zero Balance≤1 %RO≤1 %RO 
Output Polarity+Tension +Tension  
Size - Height2.50 in63.50 mm[8] 
Size - Diameter4.12 in104.60 mm[8] 
Weight6.4 lb2.9 kg 
Mounting Thread5/8 - 18 UNF-3BNo Metric Equivalent 
Sensing ElementStrain GageStrain Gage 
Mounting Torque200 in-lb23 Nm 
Deflection at Full Scale Capacity0.001 in0.03 mm 
Electrical ConnectorPT02E-10-6P (2)PT02E-10-6P (2) 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] Nominal.
[2] FS - Full Scale.
[3] RO - Rated Output.
[4] Calibrated in tension and compression.
[5] Singularly applied, i.e. no other extraneous loads.
[6] Over compensated operating temperature range.
[7] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[8] See Outline Drawing 49605 for Complete Dimensions
084A55Pre-Tension Stud(1)
084A90Connector Shroud(2)
Optional Versions:
No optional versions
Product Documents
Additional Downloads