Model : 1380-02A | rod end load cell

Click for lead times
Lead Time for 1-1 is 3 Wks
Lead Time for 0-0 is 0 Wks
pcb l&t rod end load cell, 1,000 lbf (4.4 kn) rated capacity, 50% static overload protection, 3/4-16 male & female thread, aluminum construction
$ 1,400.00 USD
(Pricing valid in US only!)

PCB L&T Rod End Load Cell, 1,000 lbf (4.4 kN) rated capacity, 50% static overload protection, 3/4-16 male & female thread, aluminum construction

  • Measurement Range: 1000 lbf ( 4448 N)
  • Size - Diameter: 1.50 in ( 38.1 mm)
  • Size - Height: 4.25 in ( 107.9 mm)
  • Electrical Connector: PT02E-10-6P
English: SI:
Performance
Measurement Range 1000 lbf 4448 N [ 1]
Sensitivity (±10 %) 2 mV/V 2 mV/V [ 2]
Non-Linearity ≤0.25 % FS ≤0.25 % FS
Hysteresis ≤0.15 % FS ≤0.15 % FS
Non-Repeatability ≤0.05 %RO ≤0.05 %RO
Resonant Frequency 10 kHz 10 kHz
Environmental
Overload Limit 1500 lbf 6672 N
Load Limit (Side Force, FX or FY) 250 lbf 1112 N [ 3]
Load Limit (Bending Moment, MX or MY) 750 inf-lb 85 Nm [ 3]
Load Limit (Axial Torque, MZ) 650 inf-lb 73 Nm [ 3]
Temperature Range (Operating) -20 to +200 °F -28 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.01 %Reading/°F ±0.018 %Reading/°C [ 4]
Temperature Effect on Zero Balance (Maximum) ±0.005 %FS/°F ±0.009 %FS/°C [ 4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [ 5]
Excitation Voltage (Recommended) 10 VDC 10 VDC [ 6]
Insulation Resistance >5000000000 Ohm >5000000000 Ohm
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity Positive Positive
Output Polarity +Tension +Tension
Physical
Size - Height 4.25 in 107.9 mm [ 7]
Size - Diameter 1.50 in 38.1 mm [ 7]
Weight 0.5 lb 227 g
Mounting Thread 3/4 - 16 Male No Metric Equivalent
Mounting Thread 3/4 - 16 Female No Metric Equivalent
Cover Material Anodized Aluminum Anodized Aluminum
Sensor Material Anodized Aluminum Anodized Aluminum
Sensing Element Strain Gage Strain Gage
Deflection at Full Scale Capacity 0.0006 in 0.015 mm
Electrical Connector PT02E-10-6P PT02E-10-6P
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] FS - Full Scale.
[ 2] RO - Rated Output.
[ 3] Singularly applied, i.e. no other extraneous loads.
[ 4] Over compensated operating temperature range.
[ 5] Nominal.
[ 6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[ 7] See Outline Drawing 45488 for complete dimensions.


Accessories


Optional
181-012A Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. 1
8311-01-10A Cable assembly for sensors with PT conn., 10-ft, PT conn. to pigtails, 4-cond. cable 1