Productos

rod end load cell, 1,000 lbf (4.4 kn) rated capacity, 50% static overload protection, 3/4-16 male & female thread, aluminum construction

ROD END LOAD CELL, 1KLB, 3/4-16, 6-PIN

Model 1380-02A

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-1 is 3 Wks.
  • IP

Rod End Load Cell, 1,000 lbf (4.4 kN) rated capacity, 50% static overload protection, 3/4-16 male & female thread, aluminum construction

Cable <20ft: 8311-17-xxA and 8311-01-xxA

Cable >=20ft: 8311-18-xxA and 8311-02-xxA

  • Measurement Range: 1000 lbf (4448 N)
  • Size - Diameter: 1.50 in (38.1 mm)
  • Size - Height: 4.25 in (107.9 mm)
  • Electrical Connector: PT02E-10-6P

Specification Notes

[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 45488 for complete dimensions.

English: SI:
Performance
Measurement Range 1000 lbf 4448 N [1]
Sensitivity (±10 %) 2 mV/V 2 mV/V [2]
Non-Linearity ≤0.25 % FS ≤0.25 % FS
Hysteresis ≤0.15 % FS ≤0.15 % FS
Non-Repeatability ≤0.05 %RO ≤0.05 %RO
Resonant Frequency 10 kHz 10 kHz
Environmental
Overload Limit 1500 lbf 6672 N
Load Limit 250 lbf 1112 N [3]
Load Limit 750 inf-lb 85 Nm [3]
Load Limit 650 inf-lb 73 Nm [3]
Temperature Range -20 to +200 °F -28 to +93 °C
Temperature Range +70 to +170 °F +21 to +77 °C
Temperature Effect on Output ±0.01 %Reading/°F ±0.018 %Reading/°C [4]
Temperature Effect on Zero Balance ±0.005 %FS/°F ±0.009 %FS/°C [4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [5]
Excitation Voltage 10 VDC 10 VDC [6]
Insulation Resistance >5000000000 Ohm >5000000000 Ohm
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity Positive Positive
Output Polarity +Tension +Tension
Physical
Size - Height 4.25 in 107.9 mm [7]
Size - Diameter 1.50 in 38.1 mm [7]
Weight 0.5 lb 227 g
Deflection at Full Scale Capacity 0.0006 in 0.015 mm

* All specifications are at room temperature unless otherwise specified.

Accessories
Optional
181-012A Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. PT06A-10-6S (SR) 1
8311-01-10A 4-conductor, PT06A-10-6S to pigtails cable, 10-ft, for Reaction Torque and Load Cells with PT connector (& 8162 Series), <20 ft 1