Products

quartz, free-field, icp® blast pressure pencil probe, 500 psi, 10 mv/psi, 4-pin connector, with two outputs for t.o.a

ICP BLAST PRESSURE SENSOR

Model 137B27

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Call for Lead Time

Quartz, free-field, ICP® blast pressure pencil probe, 500 psi, 10 mV/psi, 4-pin connector, with two outputs for T.O.A

Measurement Range: 500 psi (3447 kPa)
Sensitivity: (±15%)10 mV/psi (1.45 mV/kPa)
Resonant Frequency: >=400 kHz
Electrical Connector: 4-Pin
Weight: 16.1 oz (456 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 26 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[4] Two identically spec'd elements spaced 10cm apart - see drawing #65310 for details. Individual calibration certs supplied for each channel.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Measurement Range (for ±5V output)	500 psi	3447 kPa
Useful Overrange (for ± 10V output)	1000 psi	6895 kPa	[3]
Sensitivity (±15 %)	10 mV/psi	1.45 mV/kPa	[4]
Maximum Pressure	5 kpsi	34474 kPa
Resolution	1 mpsi	0.007 kPa	[2]
Resonant Frequency	≥400 kHz	≥400 kHz
Rise Time (Incident)	≤6.5 µ sec	≤6.5 µ sec
Non-Linearity	≤1.0 % FS	≤1.0 % FS	[1]
Environmental
Temperature Range (Operating)	-100 to +275 °F	-73 to +135 °C
Temperature Coefficient of Sensitivity	≤0.05 %/°F	≤0.090 %/°C
Electrical
Discharge Time Constant (at room temp)	≥0.2 sec	≥0.2 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Physical
Sensing Geometry	Compression	Compression
Sensing Element	Quartz	Quartz
Housing Material	Aluminum	Aluminum
Diaphragm	Invar	Invar
Sealing	Epoxy	Epoxy
Electrical Connector	4-Pin	4-Pin
Weight	16.1 oz	456 gm	[2]