Model: 1203-15A

Add to Cart for Quote

Call for lead time

PCB L&T load cell, low profile, 10,000 lbf rated capacity, 50% overload protection, 4 mV/V output, 5/8-18 UNF-2B thread, PTO2E-10-6P connector.

  • Measurement Range: 10 klbf (44 kN)
  • Size - Diameter: 4.12 in (104.6 mm)
  • Size - Height: 2.50 in (63.5 mm)
  • Electrical Connector: PT02E-10-6P

Add this product to my product comparison
Compare selected models ()

Measurement Range10 klbf44 kN[2][4] 
Sensitivity (±10 %) (RO)4.0 mV/V4.0 mV/V[1][3] 
Non-Linearity≤0.05 % FS≤0.05 % FS[2][5] 
Hysteresis≤0.05 % FS≤0.05 % FS[2][5] 
Non-Repeatability≤0.01 %RO≤0.01 %RO[3][5] 
Creep (in 20 minutes)0.025 %0.025 %[5] 
Static Error Band≤0.04 % FS≤0.04 % FS[2][5] 
Eccentric Load Sensitivity0.25 %/in0.25 %/25.4mm[5] 
Resonant Frequency10 kHz10 kHz 
Side Load Sensitivity0.25 %/in0.25 %/25.4mm[5] 
Overload Limit15 klbf67 kN 
Load Limit (Side Force, FX or FY)5000 lbf22 kN[6] 
Load Limit (Bending Moment, MX or MY)5000 lbf-in565 Nm[6] 
Load Limit (Axial Torque, MZ)5000 lbf-in565 Nm[6] 
Temperature Range (Operating)-65 to +200 °F-54 to +93 °C 
Temperature Range (Compensated)+15 to +115 °F-9 to +46 °C 
Temperature Effect on Output (Maximum)±0.0008 %Reading/°F±0.0018 %Reading/°C[7] 
Temperature Effect on Zero Balance (Maximum)±0.0008 %FS/°F±0.0018 %FS/°C[7] 
Bridge Resistance350 Ohm350 Ohm[1] 
Excitation Voltage (Recommended)10 VDC10 VDC[8] 
Insulation Resistance>5K GOhm>5K GOhm 
Zero Balance±1 %RO±1 % FS[3] 
Output Polarity+Tension +Tension  
Size - Height2.50 in63.5 mm[9] 
Size - Diameter4.12 in104.6 mm[9] 
Weight6.4 lb2.9 kg 
Mounting Thread5/8 - 18 UNF-3BNo Metric Equivalent 
Housing MaterialPainted SteelPainted Steel 
Sensing ElementStrain GageStrain Gage 
Mounting Torque200 lbf-in23 Nm 
Deflection at Full Scale Capacity0.002 in0.05 mm 
Electrical ConnectorPT02E-10-6PPT02E-10-6P 

All specifications are at room temperature unless otherwise specified.

Product Notes
[1] Nominal.
[2] FS - Full Scale.
[3] RO - Rated Output.
[4] Calibrated in tension and compression.
[5] Performance specifications guaranteed with factory installed optional Tension Base 084A100
[6] Singularly applied, i.e. no other extraneous loads.
[7] Over compensated operating temperature range.
[8] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[9] See Outline Drawing 49605 for Complete Dimensions
084A100TENSION LOAD BASE W/ 5/8-18 UNF-3B THD(1)
084A55Pre-Tension Stud(1)
084A90Connector Shroud(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads None Listed