Model : 102B14 | ICP® Pressure Sensor

Click for lead times
cryogenic icp® pressure sensor, 5000 psi, 1 mv/psi, 3/8-24 mtg thd, ground isolated with safety wire holes
Add to Cart for Quote

Cryogenic ICP® pressure sensor, 5000 psi, 1 mV/psi, 3/8-24 mtg thd, ground isolated with safety wire holes

  • Measurement Range: 5 kpsi ( 34475 kPa)
  • Sensitivity: (±15%)1.0 mV/psi ( 0.145 mV/kPa)
  • Low Frequency Response: (-5%)0.25 Hz
  • Resonant Frequency: >=250 kHz ( >=250 kHz)
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 0.388 oz ( 11.00 gm)
English: SI:
Performance
Measurement Range (for ±5V output) 5 kpsi 34475 kPa
Useful Overrange (for ± 10V output) 10 kpsi 68950 kPa [ 3]
Sensitivity (±15 %) 1.0 mV/psi 0.145 mV/kPa
Maximum Pressure (Total) 15 kpsi 103425 kPa
Resolution 100 mpsi 0.690 kPa [ 2]
Resonant Frequency ≥250 kHz ≥250 kHz
Rise Time (Reflected) ≤2.0 µ sec ≤2.0 µ sec
Low Frequency Response (-5 %) 0.25 Hz 0.25 Hz
Non-Linearity ≤1.0 % FS ≤1.0 % FS [ 1]
Environmental
Acceleration Sensitivity ≤0.002 psi/g ≤0.0014 kPa/(m/s²)
Temperature Range (Operating) -320 to +212 °F -196 to +100 °C
Temperature Coefficient of Sensitivity ≤0.06 %/°F ≤0.108 %/°C
Maximum Shock 20000 g pk 196133 m/s² pk
Electrical
Output Polarity (Positive Pressure) Positive Positive
Discharge Time Constant (at room temp) ≥2.0 sec ≥2.0 sec
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <100 Ohm <100 Ohm
Output Bias Voltage 9 to 13 VDC 9 to 13 VDC
Physical
Sensing Element Quartz Quartz
Housing Material 304L/316L Stainless Steel 304L/316L Stainless Steel
Thread Adaptor Material 316L Stainless Steel 316L Stainless Steel
Diaphragm 316L Stainless Steel 316L Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.388 oz 11.00 gm
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] Zero-based, least-squares, straight line method.
[ 2] Typical.
[ 3] Excitation voltage >=28 volts required.
[ 4] See PCB Declaration of Conformance PS023 for details.


Accessories


Supplied
065A44 Seal ring, 0.435" OD x 0.377" ID x 0.030" thk, Cu (for Model 102A10) 3


Optional Versions


( M ) Metric Mount
Accessories:
Supplied 065A34 Seal ring 0.435" OD x 0.397" ID x 0.030" Cu 3