Products

rotary torque angle transducer, w/auto-id, 100 lbf-in (11.3 nm), 1/4 inch hex drive, 10-pin pt receptacle

ROTARY TA, 100 LB-IN, 1/4-IN HEX DR

Model 039230-50101/B

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Rotary Torque Angle Transducer, w/Auto-ID, 100 lbf-in (11.3 Nm), 1/4 inch Hex Drive, 10-pin PT Receptacle

For more information on RS Technologies Fastener products and applications, please visit:
https://www.pcb.com/sensors-for-test-measurement/fastener-technology
and click the link for Fastener Testing or Fastener Assembly
  • Measurement Range: 100 lbf-in (11.3 Nm)
  • Sensitivity: 2.0 mV/V (2.0 mV/V)
  • Non-Linearity: <=0.25 % FS
  • Maximum Speed: 5000 RPM

Specification Notes

[1] FS - Full Scale.
[2] Matched for mV/V and shunt calibration.
[3] Matched to ±0.25% F.S.
[4] Over compensated temperature range.
[1] FS - Full Scale.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] A-B Track 90° Phase Difference, Flat Over Operating Speed
[7] Magnetic Encoder Specifications.
[8] Matched with 43.575 kOhm Precision Resistor.
[9] See Outline Drawing 45188 for Complete Dimensions
[10] Per ANSI B107.4 Specifications
[11] See PCB Declaration of Conformance PS119 for details.

English: SI:
Performance
Measurement Range (Full Scale Capacity) 100 lbf-in 11.3 Nm
Sensitivity (output at rated capacity) 2.0 mV/V 2.0 mV/V [3]
Non-Linearity ≤0.25 % FS ≤0.25 % FS [1]
Hysteresis ≤0.25 % FS ≤0.25 % FS [1]
Non-Repeatability ≤0.05 % FS ≤0.05 % FS [1]
Interchangeabilty ≤0.30 % FS ≤0.30 % FS [1] [2]
Environmental
Overload Limit 150 lbf-in 16.9 Nm
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) +70 to +150 °F +21 to +66 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0018 %Reading/°C [4]
Temperature Effect on Zero Balance (Maximum) ±0.002 %FS/°F ±0.0018 %FS/°C [4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm
Excitation Voltage 10 VDC 10 VDC [5]
Insulation Resistance ≥5 GOhm ≥5 GOhm
Zero Balance ≤2 % FS ≤2 % FS [1]
Counts Per Revolution 1472 1472 [7]
Resolution w/ Quadrature 1/4 ° 1/4 ° [7]
Output Voltage High 5V to Low 0.5V High 5V to Low 0.5V [7]
Power Required (maximum) 5 VDC @ 120mA 5 VDC @ 120mA [7]
Magnetic Encoder (Poles) 368 368 [7]
Magnetic Encoder (Ouput) See Note See Note [6] [7]
Shunt Calibration ≤0.25 % FS ≤0.25 % FS [1] [8]
Auto ID TTL Proprietary TTL Proprietary
Physical
Size - Shaft Length 4.25 in 108.0 mm [9]
Size - Housing Length 2.30 in 58.4 mm [9]
Size - Housing Height 2.00 in 50.8 mm
Weight .75 lb 340 gm
Mounting 1/4 inch Hex Drive 6.35 mm Hex Drive [10]
Sensing Element Strain Gage Strain Gage
Housing Material Aluminum Aluminum
Shaft Material Steel Steel
Electrical Connector PT02H-12-10P PT02H-12-10P
Maximum Speed 5000 RPM 5000 RPM

* All specifications are at room temperature unless otherwise specified.

Accessories
Optional
080920-01000 Model 920 Portable Digital Peak Meter for torque, torque-angle or load measurement; Click-Wrench calc feature, w/battery charger, instruction manual & shoulder strap 1
080962-01000 Model 962 Portable Transient Data Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case 1
097000-34445 Cable Assembly, DB-15P to PT06A-12-10S, 2-ft coiled (9-ft straight), Connects Hand Torque-Angle Wrench, Hand Torque Only Wrench w/ LEDs or Rotary Torque/Torque-Angle Transducer w/ Auto-ID to RS Instrument (Model 922, 962, LabMaster) 1
4242R-000630 1
Supplied
7122R-04352A Precision Cal Resistor 43.575K Ohm 1

Build Out Your Measurement Chain