Products

quartz shear triaxial icp® accelerometer, 10 mv/g, 2 to 5k hz, titanium housing, 1/4-28 4-pin, 5-40 stud mount, low temperature coefficient ltc, +325f temp rating, teds 1.0

TRIAXIAL ICP? ACCELEROMETER TEDS1.0

Model TLD339A36

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-5 is 8 Wks. Lead Time for 6-10 is 10 Wks. Lead Time for 11-20 is 12 Wks.
	Lead Time for 11-20 is 12 Wks.

Quartz shear triaxial ICP® accelerometer, 10 mV/g, 2 to 5k Hz, titanium housing, 1/4-28 4-pin, 5-40 stud mount, low temperature coefficient LTC, +325F temp rating, TEDS 1.0

Electrical Filter Corner Frequency: >13 kHz

Sensitivity: (±10%)10 mV/g (1.0 mV/(m/s²))
Measurement Range: ±500 g pk (±4900 m/s² pk)
Electrical Connector: 1/4-28 4-Pin

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±10 %)	10 mV/g	1.0 mV/(m/s²)
Measurement Range	±500 g pk	±4900 m/s² pk
Frequency Range (±5 %)	2 to 5000 Hz	2 to 5000 Hz
Frequency Range (±10 %)	1 to 8000 Hz	1 to 8000 Hz
Resonant Frequency	≥35 kHz	≥35 kHz
Filter Type (single pole)	Low Pass	Low Pass
Electrical Filter Roll-off	6 dB/octave	6 dB/octave
Electrical Filter Corner Frequency	>13 kHz	>13 kHz
Broadband Resolution (1)	.003 g rms	.029 m/sec²rms	[2]
Non-Linearity	≤1 %	≤1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %
TEDS Compliant (Per IEEE 1451.4)	Yes	Yes
Environmental
Overload Limit (Shock)	±5000 g pk	±49000 m/s² pk
Temperature Range (Operating)	-65 to 325 °F	-54 to 163 °C
Temperature Response	See Graph	See Graph	[2]
Temperature Coefficient of Sensitivity	-.03 %/°F	-.06 %/°C	[2]
Base Strain Sensitivity	.001 g/µε	.0098 (m/s²)/µε	[2]
Electrical
Excitation Voltage	21 to 30 VDC	21 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤200 Ohm	≤200 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Discharge Time Constant	.3 to 1.1 sec	.3 to 1.1 sec
Settling Time (within 10% of bias)	<5 sec	<5 sec
Spectral Noise (1 Hz)	2080 µg/√Hz	20405 (µm/sec²)/√Hz	[2]
Spectral Noise (10 Hz)	250 µg/√Hz	2453 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	50 µg/√Hz	491 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	20 µg/√Hz	196 (µm/sec²)/√Hz	[2]
Spectral Noise (10 kHz)	19 µg/√Hz	186 (µm/sec²)/√Hz	[2]
Physical
Sensing Element	Quartz	Quartz
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Height	0.55 in	14.0 mm
Size - Length	0.80 in	20.3 mm
Size - Width	0.55 in	14.0 mm
Weight	0.37 oz	10.5 gm	[2]
Electrical Connector	1/4-28 4-Pin	1/4-28 4-Pin
Electrical Connection Position	Side	Side
Mounting Thread	5-40 Female	5-40 Female

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A145	Adhesive mtg base, 0.75" hex x 0.2" thk, 5-40 tapped hole, w/isolating hardcoat finish	1
080A90	Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)	1
081A27	Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu	1
ACS-1T	Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable	1
M081A27	Metric mtg stud, 5-40 to M3 x 0.50 long	1