Log In

Log In

Need an Account? Start Here

 

Model: 054230-01404

Add to Cart for Quote

PCB L&T Fastener Force Washer, Metric, M30, 400 kN 89.9 klbf), 5-ft Integral Cable w/pigtails

  • Measurement Range: 89923 lb (400 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 2.38 in (60.45 mm)
  • Size - Height: 0.875 in (22.23 mm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (Full Scale Capacity)89923 lb400 kN[2] 
Sensitivity (output at rated capacity)1.50 mV/V1.50 mV/V[1][2] 
Non-Linearity±5 % FS±5 % FS[1] 
Hysteresis±5 % FS±5 % FS[1] 
Non-Repeatability±2 % FS±2 % FS[1] 
Resonant Frequency10 kHz10 kHz 
Environmental
Overload Limit134885 lb600 kN 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)N/A N/A  
Temperature Effect on Output (Maximum)±0.02 %Reading/°F±0.036 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.02 %FS/°F±0.036 %FS/°C[1] 
Electrical
Bridge Resistance350 Ohm350 Ohm[2] 
Excitation Voltage (Recommended)10 VDC10 VDC[4] 
Output Polarity (Compression)PositivePositive 
Physical
Size - Height0.875 in22.23 mm 
Size - Diameter2.38 in60.45 mm 
Fastener Size1.181 in30 mm 
Through Hole Diameter1.188 in30.18 mm 
Sensing ElementStrain GageStrain Gage 
Electrical Connectorpigtail endspigtail ends 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] FS - Full Scale.
[2] Nominal.
[3] Over compensated operating temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
Accessories:
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads