Products

high sensitivity, icp® accel, 10 v/g, m6x1 x10 dp mnt thrd, rt ang exit, 250mm of int gore cable, odu conn. (sx0lcv-l04nf00-0001) mtg short cap (gx0lcv-l04pf00-0003 ), teds 1.0, bit osc function, gr 2 clean&pack, asml lf x2 sensor 4022.693.91911

ACCELEROMETER, SPECIAL X2

Model TLD393M116

Add to Quote
  • CE
  • IP

High sensitivity, ICP® accel, 10 V/g, M6x1 x10 dp mnt thrd, Rt Ang exit, 250mm of int GORE cable, ODU conn. (SX0LCV-L04NF00-0001) mtg short cap (GX0LCV-L04PF00-0003 ), TEDS 1.0, Bit Osc Function, Gr 2 clean&pack, ASML LF X2 Sensor 4022.693.91911

  • Sensitivity: (±5%)10.0 V/g (1.02 V/(m/s²))
  • Broadband Resolution: 0.6 µg rms (5.9 µm/sec2 rms)
  • Measurement Range: 0.5 g pk (4.9 m/s² pk)
  • Frequency Range: (±5%)0.10 to 200 Hz
  • Electrical Connector: Sealed Integral Cable (Sealed Integral Cable)
  • Weight: 1.61 lb (0.73 kg)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Measured at 10 Hz, 0.1 grms
[4] Phase response shall be ±2° between 0.5 and 3 Hz; +0.5/-2.5° between 3 and 12 Hz; 0/-3.5° between 12 and 30 Hz; -1/-6° between 30 and 50 Hz; and -2/-9° between 50 and 100 Hz.
[2] Typical.
[5] At 67 Hz.
[2] Typical.
[6] Calculated.
[2] Typical.
[7] Special cleaning and packaging as referenced on PCB outline drawing
[8] Cover and Lid is 304L SS. All other external metal components are 316L SS
[9] See Outline Drawing for cable length
[10] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±5 %) 10.0 V/g 1.02 V/(m/s²) [3]
Measurement Range 0.5 g pk 4.9 m/s² pk
Frequency Range (±5 %) 0.10 to 200 Hz 0.10 to 200 Hz
Frequency Range (±10 %) 0.07 to 300 Hz 0.07 to 300 Hz
Frequency Range (±3 dB) 0.03 to 500 Hz 0.03 to 500 Hz
Resonant Frequency ≥700 Hz ≥700 Hz
Phase Response 0.5 to 100 Hz 0.5 to 100 Hz [4]
Broadband Resolution (1) 0.6 µg rms 5.9 µm/sec2 rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
TEDS Compliant (Per IEEE 1451.4) Yes Yes
Environmental
Overload Limit (Shock) ±40 g pk ±392 m/s² pk
Temperature Range -15 to +150 °F -26 to +65 °C
Temperature Response See Graph %/°F See Graph %/°F
Base Strain Sensitivity ≤0.0005 g/µε ≤0.005 (m/s²)/µε [2]
Magnetic Sensitivity <0.2 g/Tesla <2.0 (m/s²)/Tesla [5]
Electrical
Excitation Voltage 24 to 28 VDC 24 to 28 VDC
Constant Current Excitation 2 to 10 mA 2 to 10 mA
Output Impedance ≤500 Ohm ≤500 Ohm
Output Bias Voltage 8 to 13 VDC 8 to 13 VDC
Discharge Time Constant 15 to 60 sec 15 to 60 sec
Settling Time (within 10% of bias) <120 sec <120 sec
Settling Time (within 1% of bias) <500 sec <500 sec
Spectral Noise (0.01 Hz) 1.3 µg/√Hz 13.0 (µm/sec2)/√Hz [2] [6]
Spectral Noise (0.1 Hz) 0.41 µg/√Hz 4.0 (µm/sec2)/√Hz [2] [6]
Spectral Noise (1 Hz) 0.14 µg/√Hz 1.4 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 0.04 µg/√Hz 0.4 (µm/sec2)/√Hz [2]
Spectral Noise (>10 Hz) 0.04 µg/√Hz 0.4 (µm/sec2)/√Hz [2]
Electrical Isolation (Case) >100 MOhm >100 MOhm
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Flexural Flexural
Housing Material Stainless Steel Stainless Steel [8]
Sealing Hermetic Hermetic [7]
Size - Diameter 2.25 in 57.2 mm
Size - Height 2.68 in 68.1 mm
Weight 1.61 lb 0.73 kg [2]
Electrical Connector Sealed Integral Cable Sealed Integral Cable [9]
Electrical Connection Position Side Side
Mounting Thread M6 x 1.0 Female M6 x 1.0 Female
Cable Type 4-cond Shielded 4-cond Shielded
Cable Termination 4-Socket 4-Socket

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
ACS-11 Single axis long stroke shaker amplitude response cal from 0.5 Hz to upper 5% point (max 1000 Hz, min 50 mV/g) 1