Products

miniature (2 gm), ring-style, ceramic shear icp® accel., 10 mv/g, 1 to 10k hz, 5-44 side conn., through hole mtg with m2x0.4 insulated cap screw, ground isolated

ACCELEROMETER

Model M355B12

Add to Quote
  • CE
  • IP

Miniature (2 gm), ring-style, ceramic shear ICP® accel., 10 mV/g, 1 to 10k Hz, 5-44 side conn., through hole mtg with M2x0.4 insulated cap screw, ground isolated

  • Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4905 m/s² pk)
  • Broadband Resolution: 0.0005 g rms (0.005 m/s² rms)
  • Frequency Range: (±5%)1 to 10000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.08 oz (2.3 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[4] When used with off ground washer, high frequency specification is typically 2 kHz less on 10% and 3 dB points.
[2] Typical.
[5] Only when using off ground washer.
[4] When used with off ground washer, high frequency specification is typically 2 kHz less on 10% and 3 dB points.
[2] Typical.
[6] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ±500 g pk ±4905 m/s² pk
Frequency Range (±5 %) 1 to 10000 Hz 1 to 10000 Hz
Frequency Range (±10 %) 0.6 to 15000 Hz 0.6 to 15000 Hz [4]
Frequency Range (±3 dB) 0.3 to 25000 Hz 0.3 to 25000 Hz [4]
Resonant Frequency ≥50 kHz ≥50 kHz
Broadband Resolution (1) 0.0005 g rms 0.005 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 % [3]
Environmental
Overload Limit ±10000 g pk ±98100 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Base Strain Sensitivity ≤0.05 g/µε ≤0.5 (m/s²)/µε [2]
Electrical
Excitation Voltage 19 to 30 VDC 19 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.5 to 2.0 sec 0.5 to 2.0 sec
Settling Time (within 10% of bias) ≤5 sec ≤5 sec
Spectral Noise (1 Hz) 190 µg/√Hz 1860 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 30 µg/√Hz 294 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 12 µg/√Hz 118 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 5 µg/√Hz 49 (µm/sec2)/√Hz [2]
Electrical Isolation (Base) ≥100000000 Ohm ≥100000000 Ohm [5] [4]
Physical
Size - Height 0.23 in 5.84 mm
Size - Length 0.68 in 17.3 mm
Size - Width 0.38 in 9.6 mm
Weight 0.08 oz 2.3 gm [2]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 5-44 Coaxial 5-44 Coaxial
Electrical Connection Position Side Side
Mounting Through Hole Through Hole

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
039A20 Allen wrench (for use with 2-56 thd cap screws) 1
081B36 Off ground socket head cap screw assembly, 2-56 UNC-2A thd., 0.375 length, alloy steel 1
ACS-1 Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable 1

Optional Versions

(M) Metric Mount
Accessories:
Supplied M081C36 Accessory for IMI Sensors Product 1
Supplied M039A20 Allen wrench, 1.5mm hex 1
Supplied M081C36 Accessory for IMI Sensors Product 1
Supplied M081C36 Accessory for IMI Sensors Product 1
Supplied M039A20 Allen wrench, 1.5mm hex 1
Supplied M081C36 Accessory for IMI Sensors Product 1