Products

high voltage triaxial icp® accel., 100 mv/g, 50 g, adhesive mount, teds 1.0, overcoated for 2000 volts,10 ft integral cable to a 4-pin ca connector

ACCELEROMETER

Model HV356A45

Add to Quote
  • CE
  • IP

HIGH VOLTAGE Triaxial ICP® accel., 100 mV/g, 50 g, adhesive mount, TEDS 1.0, overcoated for 2000 volts,10 ft integral cable to a 4-pin CA connector

ICP® accelerometers designed for vibration measurement on energized high-voltage electric vehicle systems. Series HV356A incorporates a non-conductive housing rated for direct contact up to 2000 VDC, enabling safe and accurate vibration collection on energized components.
  • Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
  • Measurement Range: ±50 g pk (±490 m/s² pk)
  • Frequency Range: (+/-10%)0.4 to 6000 Hz
  • Electrical Connector: Integral Cable

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Maximum.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²)
Measurement Range ±50 g pk ±490 m/s² pk
Frequency Range (+/-5 %) 0.7 to 5000 Hz 0.7 to 5000 Hz
Frequency Range (+/-10 %) 0.4 to 6000 Hz 0.4 to 6000 Hz
Resonant Frequency ≥30 kHz ≥30 kHz
Broadband Resolution (1) 0.0005 g rms 0.005 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤7 % ≤7 %
TEDS Compliant (Per IEEE 1451.4) Yes Yes
Environmental
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
Temperature Range (Operating) -65 to 185 °F -54 to 85 °C
Temperature Response See Graph See Graph [2]
Base Strain Sensitivity .001 g/µε .01 (m/s²)/µε [2]
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.8 to 2.4 sec 0.8 to 2.4 sec
Settling Time (within 10% of bias) ≤5 sec ≤5 sec
Spectral Noise (1 Hz) 125 µg/√Hz 1226 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 40 µg/√Hz 392 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 15 µg/√Hz 147 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [2]
Electrical Isolation 2000 VDC 2000 VDC [3]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Polymer Polymer
Sealing Hermetic Hermetic
Size - Height 0.50 in 12.7 mm
Size - Length 0.80 in 20.3 mm
Size - Width 0.50 in 12.7 mm
Weight (without cable) 0.20 oz 5.7 gm [2]
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Cable Termination 1/4-28 4-Pin Jack 1/4-28 4-Pin Jack
Cable Length 10.00 ft 3.0 m
Cable Type 4-conductor shielded, polyolefin jacket 4-conductor shielded, polyolefin jacket
Mounting Adhesive Adhesive

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1