Products

intrinsically-safe, dual output (vibration/temperature), low profile, industrial, ceramic shear icp® accel., 100 mv/g, 0.5 to 8000 hz, side exit, 2-pin connector, single point iso 17025 accredited calibration

HAZ AREA APP TO602D01

Model EXTO602D01

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • EX
  • IP

Intrinsically-safe, dual output (vibration/temperature), low profile, industrial, ceramic shear ICP® accel., 100 mV/g, 0.5 to 8000 Hz, side exit, 2-pin connector, single point ISO 17025 accredited calibration

    Specification Notes

    [1] Conversion Factor 1g = 9.81 m/s².
    [2] Zero-based, least-squares, straight line method.
    [3] The high frequency tolerance is accurate within ±10% of the specified frequency.
    [4] Typical.
    [5] 1/4-28 has no equivalent in S.I. units.
    [6] See PCB Declaration of Conformance PS023 or PS060 for details.

    English: SI:
    Performance
    Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1]
    Measurement Range ±50 g ±490 m/s²
    Frequency Range (±3 dB) 30 to 480000 cpm 0.5 to 8000 Hz [3]
    Resonant Frequency 1500 kcpm 25 kHz [4]
    Broadband Resolution 350 µg 3434 µm/sec2 [4]
    Non-Linearity ±1 % ±1 % [2]
    Transverse Sensitivity ≤7 % ≤7 %
    Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk
    Temperature Range -65 to +250 °F -54 to +121 °C
    Temperature Response See Graph %/°F See Graph %/°F [4]
    Enclosure Rating IP68 IP68
    Electrical
    Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec
    Discharge Time Constant ≥0.3 sec ≥0.3 sec
    Excitation Voltage 18 to 28 VDC 18 to 28 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance <150 Ohm <150 Ohm
    Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
    Spectral Noise (10 Hz) 8.0 µg/√Hz 78.5 (µm/sec2)/√Hz [4]
    Spectral Noise (100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [4]
    Spectral Noise (1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [4]
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
    Physical
    Size - Length 1.65 in 41.9 mm
    Size - Width 0.74 in 18.8 mm
    Size - Height 0.845 in 21.5 mm
    Weight 2.61 oz 74.0 gm
    Mounting Thread 1/4-28 Male No Metric Equivalent [5]
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
    Sensing Element Ceramic Ceramic
    Sensing Geometry Shear Shear
    Housing Material Stainless Steel Stainless Steel
    Sealing Welded Hermetic Welded Hermetic
    Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
    Electrical Connection Position Side Side

    * All specifications are at room temperature unless otherwise specified.

    TempChart

    Accessories
    Supplied
    081B97 CAPTIVE MOUNTING BOLT 316SS- 7/16 HEX, 1/4-28 UNF, 1 INCH LENGTH 1
    ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1

    Optional Versions

    (EX) Hazardous Area Approval- contact factory for specific approvals

    English SI
    Hazardous Area Approval EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    Hazardous Area Approval EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4

    (TO) Temperature Output

    English SI
    Temperature Output Range +36 to +250 °F +2 to +121 °C
    Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C
    Electrical Connector 3-Pin
    Electrical Connections Acceleration Output
    Electrical Connections Temperature Output
    Electrical Connections Ground