Intrinsically-safe vibration sensor, 4 to 20 mA output, 0 to 2.0 in/sec pk, 3 to 1k Hz, top exit, terminal block with conduit elbow
- Measurement Range:
0.0 to 2.0 in/sec pk
(
0.0 to 50.8 mm/s pk)
- Output:
4-20 mA
- Frequency Range:
(±3dB)180 to 60000 cpm
(
3 to 1000 Hz)
- Sensing Element:
Ceramic
- Weight:
1.2 lb
(
544 gm)
|
English: |
SI: |
|
Performance |
Measurement Range |
0.0 to 2.0 in/sec pk |
0.0 to 50.8 mm/s pk |
[
3]
|
Output |
4-20 mA |
4-20 mA |
|
Frequency Range (±3 dB) |
180 to 60000 cpm |
3 to 1000 Hz |
[
1]
[
2]
|
Broadband Resolution |
0.01 in/sec pk |
0.26 mm/s pk |
[
4]
|
Non-Linearity |
±1 % |
±1 % |
|
Environmental |
Temperature Range |
-40 to 176 °F |
-40 to 80 °C |
|
Electrical |
Excitation Voltage |
12 to 30 VDC |
12 to 30 VDC |
|
Settling Time (within 2% of value) |
<15 sec |
<15 sec |
|
Electrical Isolation (Case) |
>100000000 Ohm |
>100000000 Ohm |
|
Physical |
Size - Hex |
3.85 in |
98 mm |
|
Size - Height |
5.52 in |
140 mm |
|
Weight |
1.2 lb |
544 gm |
|
Mounting Thread |
1/4 NPT |
No Metric Equivalent |
|
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Stainless Steel |
Stainless Steel |
|
Electrical Connector |
Removable Screw Terminals |
Removable Screw Terminals |
|
Electrical Connection Position |
Top |
Top |
|
Electrical Connections (Tab 1) |
4-20 mA Pos (+) |
4-20 mA Pos (+) |
|
Electrical Connections (Tab 2) |
4-20 mA Neg (-) |
4-20 mA Neg (-) |
|
Screw Terminal Wire Size |
12-24 AWG |
3.0 - .2mm² |
|
* All specifications are at room temperature unless otherwise specified
.
Specification Notes
[
1]
1Hz = 60 cpm (cycles per minute).
[
2]
Current will fluctuate at frequencies below 5 Hz.
[
3]
Conversion Factor 1 in/sec = 0.0254 m/sec.
[
4]
Typical.
[
5]
See PCB Declaration of Conformance PS039 or PS053 for details.
Accessories
|
|
|
Supplied |
ICS-4 |
NIST-traceable single axis amplitude response cal from 0 to +10% freq. (for 4 to 20 mA sensors) |
1 |
Optional Versions
(
EX )
Hazardous Area Approval- contact factory for specific approvals
Hazardous Area Approval |
Ex ia IIC T4, -40°C≤Ta≤80°C, II 1 G |
Hazardous Area Approval |
Ex nA IIC T4, -40°C≤Ta≤80°C, II 3 G |
Hazardous Area Approval |
DIV I, CL I, II, III, GRPS A-G, Exia, AExia, IIC T4 |
Hazardous Area Approval |
DIV II, CL I, GRPS A-D, ExnA, AExnA, IIC T4 |
(
RV )
Buffered Analog Signal Output - 100 mV/g (±20%)
Electrical Connector |
Removable Screw Terminals |
Electrical Connections |
4-20 mA Pos (+) |
Electrical Connections |
4-20 mA Neg (-) |
Electrical Connections |
Signal Output Pos |
Electrical Connections |
Signal Output Neg |