Ring-style, industrial, quartz shear ICP® accel, 100 mV/g, 0.8 to 10k Hz, side exit, 10-ft integral cable, frequency sweep ISO 17025 accredited calibration
- Sensitivity: (±5%) 100 mV/g
(10.2 mV/(m/s²))
- Frequency Range: (±3dB)48 to 600000 cpm
(0.8 to 10000 Hz)
- Sensing Element: Quartz
- Measurement Range: ±50 g
(±490 m/s²)
- Weight: 4.2 oz
(120 gm)
Additional Configurations:
|
English: |
SI: |
|
Performance |
Sensitivity (±5 %) |
100 mV/g |
10.2 mV/(m/s²) |
[1]
|
Measurement Range |
±50 g |
±490 m/s² |
|
Frequency Range (±5 %) |
144 to 300000 cpm |
2.4 to 5000 Hz |
[3]
|
Frequency Range (±10 %) |
102 to 420000 cpm |
1.7 to 7000 Hz |
|
Frequency Range (±3 dB) |
48 to 600000 cpm |
0.8 to 10000 Hz |
|
Resonant Frequency |
1080 kcpm |
18 kHz |
[4]
|
Broadband Resolution (1) |
1000 µg |
9810 µm/sec2 |
[4]
|
Non-Linearity |
±1 % |
±1 % |
[2]
|
Transverse Sensitivity |
≤5 % |
≤5 % |
|
Environmental |
Overload Limit (Shock) |
5000 g pk |
49050 m/s² pk |
|
Temperature Range |
-65 to +250 °F |
-54 to +121 °C |
|
Temperature Response |
See Graph %/°F |
See Graph %/°F |
[4]
|
Enclosure Rating |
IP68 |
IP68 |
|
Electrical |
Settling Time (within 1% of bias) |
≤10 sec |
≤10 sec |
|
Discharge Time Constant |
≥0.2 sec |
≥0.2 sec |
|
Excitation Voltage |
18 to 28 VDC |
18 to 28 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
<100 Ohm |
<100 Ohm |
|
Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
Spectral Noise (10 Hz) |
50 µg/√Hz |
491 (µm/sec2)/√Hz |
[4]
|
Spectral Noise (100 Hz) |
20 µg/√Hz |
196 (µm/sec2)/√Hz |
[4]
|
Spectral Noise (1 kHz) |
6 µg/√Hz |
59 (µm/sec2)/√Hz |
[4]
|
Electrical Protection |
RFI/ESD |
RFI/ESD |
|
Electrical Isolation (Case) |
>100000000 Ohm |
>100000000 Ohm |
|
Physical |
Size - Diameter |
1.37 in |
34.8 mm |
|
Size - Height |
.955 in |
24.3 mm |
|
Weight (without cable) |
4.2 oz |
120 gm |
|
Mounting Thread |
1/4-28 Male |
Not Applicable |
[6]
|
Mounting Torque |
2 to 5 ft-lb |
2.7 to 6.8 Nm |
|
Sensing Element |
Quartz |
Quartz |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Stainless Steel |
Stainless Steel |
|
Sealing |
Welded Hermetic |
Welded Hermetic |
|
Electrical Connector |
Molded Integral Cable |
Molded Integral Cable |
|
Electrical Connection Position |
Side |
Side |
|
Cable Length |
10 ft |
3.0 m |
|
Cable Type |
Polyurethane |
Polyurethane |
[5]
|
* All specifications are at room temperature unless otherwise specified
.


Specification Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] Twisted shielded pair.
[6] 1/4-28 has no equivalent in S.I. units.
[7] See PCB Declaration of Conformance PS023 for details.
Accessories
|
|
|
Supplied |
081A67 |
Captive mounting bolt, 1/4-28 x 1.12" long, hex head (for series 624 & 625A sensors) |
1 |
ICS-1 |
Calibration of industrial accel. with full frequency response plot and NIST-traceable certificate |
1 |
Optional Versions
( LB ) Low Bias Voltage
Output Bias Voltage |
6 to 8 |
Excitation Voltage |
12 to 28 |
Measurement Range |
±35 |
±343 |
( M ) Metric Mount
Accessories: |
Supplied |
M081A67 |
Captive Mounting Bolt |
1 |
( TO ) Temperature Output
Temperature Output Range |
+36 to +250 |
+2 to +121 |
Temperature Scale Factor |
5.56 mV/°F + 32 |
+10 mV/°C |
Electrical Connector |
Molded Integral Cable |
Electrical Connections |
Ground |
Electrical Connections |
Ground |
Electrical Connections |
Temperature Output |
Electrical Connections |
Acceleration Output |