Model : 608M50 | Industrial 3-Wire Accelerometer

Click for lead times
$ 198.00 USD
(Pricing valid in US only!)

Low power, industrial ceramic shear ICP® accel, 100 mV/g, 1.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration

  • Sensitivity: (±20%)100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB)90 to 600000 cpm (1.5 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±50 g (±490 m/s²)
  • Weight: 3.5 oz (99.3 gm)
English: SI:
Performance
Sensitivity (±20 %) 100 mV/g 10.2 mV/(m/s²) [1]
Measurement Range (12 VDC) ±50 g ±490 m/s² [3]
Measurement Range (5 VDC) ±15 g ±147 m/s² [3]
Frequency Range (±3 dB) 90 to 600000 cpm 1.5 to 10000 Hz
Resonant Frequency 1320 kcpm 22 kHz [3]
Broadband Resolution (1) 2 mg 19.6 mm/s² [3]
Non-Linearity ±1 % ±1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [3]
Enclosure Rating IP68 IP68
Electrical
Settling Time (within 1% of bias) ≤5.0 sec ≤5.0 sec
Discharge Time Constant ≥0.1 sec ≥0.1 sec
Excitation Voltage 5 to 12 VDC 5 to 12 VDC
Output Impedance <100 Ohm <100 Ohm
Current Draw 0.5 mA 0.5 mA
Output Bias Voltage 2.5 to 6 VDC 2.5 to 6 VDC
Spectral Noise (10 Hz) 18 µg/√Hz 176.6 (µm/sec2)/√Hz [3]
Spectral Noise (100 Hz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [3]
Spectral Noise (1 kHz) 2 µg/√Hz 19.6 (µm/sec2)/√Hz [3]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 9/16 in 14 mm
Size - Height 2.5 in 64 mm
Weight (with cable) 3.5 oz 99.3 gm
Mounting Stud Stud
Mounting Thread 1/4-28 Female 1/4-28 Female [4]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Molded Molded
Electrical Connector Molded Integral Cable Molded Integral Cable
Electrical Connection Position Top Top
Cable Termination Blunt cut Blunt cut [4]
Electrical Connections (Red) Pos (+) Power Pos (+) Power
Electrical Connections (Black) Ground Ground
Electrical Connections (White) Acceleration Output Acceleration Output
Cable Length 10 ft 3 m
Cable Type Polyurethane Polyurethane
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] Typical.
[4] 1/4-28 has no equivalent in S.I. units.


Accessories


Supplied
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1


Optional Versions


( M ) Metric Mount
Accessories:
Supplied M081A61 Mounting Stud 0