Products

low profile industrial icp® accel, 100 mv/g, 0.4 to 14k hz, side exit, extra rf protection, integral cable & swiveler base, single point iso 17025 accredited calibration.

ACCELEROMETER

Model 607M140

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Low profile industrial ICP® accel, 100 mV/g, 0.4 to 14k Hz, side exit, extra RF protection, integral cable & swiveler base, single point ISO 17025 accredited calibration.

  • Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB)24 to 840000 cpm (0.4 to 14000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±80 g (±785 m/s²)
  • Weight: 1.1 oz (31 gm)

Additional configurations:

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²) [1]
Measurement Range ±80 g ±785 m/s²
Frequency Range (±3 dB) 24 to 840000 cpm 0.4 to 14000 Hz [3]
Resonant Frequency 1500 kcpm 25 kHz [4]
Broadband Resolution (1) 550 µg 5395 µm/sec2 [4]
Non-Linearity 1 % 1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [4]
Enclosure Rating IP68 IP68
Electrical
Settling Time (within 1% of bias) ≤2.0 sec ≤2.0 sec
Discharge Time Constant ≥0.4 sec ≥0.4 sec
Excitation Voltage 24 to 28 VDC 24 to 28 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <150 Ohm <150 Ohm
Output Bias Voltage 10 to 14 VDC 10 to 14 VDC
Spectral Noise (10 Hz) 10 µg/√Hz 98.1 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 7 µg/√Hz 68.7 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 7 µg/√Hz 68.7 (µm/sec2)/√Hz [4]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 9/16 in 14 mm
Size - Height 0.97 in 24.6 mm
Weight 1.1 oz 31 gm
Mounting Stud Stud
Mounting Thread 1/4-28 Male No Metric Equivalent [5]
Mounting Torque 3 to 4 ft-lb 4.1 to 5.4 Nm
Mounting Torque 2 to 3 ft-lb 2.7 to 4.1 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector Molded Integral Cable Molded Integral Cable
Electrical Connection Position Side Side
Cable Length 10 ft 3.0 m
Cable Type Polyurethane Polyurethane

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
080A156 Swivel mounting stud, 1/2-20 to 1/4-28 stud with 1/8" hex socket for installation (for models 607A11 & 607A61) 1
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1