Model : 603M113 | Industrial Accelerometer

Call for lead time
$ 190.00 USD
(Pricing valid in US only!)

Low power, industrial, ceramic shear accel, 100 mV/g, 1.6 to 10k Hz, top exit, 3-pin conn., single point ISO 17025 accredited calibration

  • Sensitivity: (±20%)100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB)96 to 600000 cpm (1.6 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±50 g (±490 m/s²)
  • Weight: 2.0 oz (56.7 gm)
English: SI:
Performance
Sensitivity (±20 %) 100 mV/g 10.2 mV/(m/s²) [1]
Measurement Range (12 VDC) ±50 g ±490 m/s² [4]
Measurement Range (5 VDC) ±15 g ±147 m/s² [4]
Frequency Range (±3 dB) 96 to 600000 cpm 1.6 to 10000 Hz [3]
Resonant Frequency 1500 kcpm 25 kHz [4]
Broadband Resolution (1) 1.5 mg 15 mm/s² [4]
Non-Linearity ±1 % ±1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [4]
Enclosure Rating IP68 IP68
Electrical
Settling Time (within 1% of bias) ≤5.0 sec ≤5.0 sec
Discharge Time Constant ≥0.1 sec ≥0.1 sec
Excitation Voltage 5 to 12 VDC 5 to 12 VDC
Output Impedance <100 Ohm <100 Ohm
Output Bias Voltage 2.5 to 6.0 VDC 2.5 to 6.0 VDC
Spectral Noise (10 Hz) 18 µg/√Hz 176.6 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 2 µg/√Hz 19.6 (µm/sec2)/√Hz [4]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 11/16 in 18 mm
Size - Height 1.86 in 47.2 mm
Weight 2.0 oz 56.7 gm
Mounting Thread 1/4-28 Female No Metric Equivalent [5]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
Electrical Connection Position Top Top
Electrical Connections (Pin A) Pos (+) Power Pos (+) Power
Electrical Connections (Pin B) Ground Ground
Electrical Connections (Pin C) Signal Signal
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.


Accessories


Supplied
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1