Products

4-channel, line-powered, icp®/charge sensor signal cond., incremental gain, selectable charge conversion, teds, 10k lpf, usb, ethernet

4-CHANNEL DUAL MODE SIGNAL CONDITIONER

Model 482D64

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
  • IP

4-channel, line-powered, ICP®/charge sensor signal cond., incremental gain, selectable charge conversion, TEDS, 10k LPF, USB, Ethernet

  • Frequency Range: (-5%)0.1 to 50,000 Hz
  • DC Power: +9 to +18 VDC

Specification Notes

[1] The low frequency tolerance is accurate within ±20% of the specified frequency.
[2] Frequency tolerance is within ± 5% of the specified value.
[3] Contact factory for other available frequencies.
[4] Maintain -5% amplitude up to 50k Hz response for all gain settings. High Frequency will be reduced for source capacitance >5 nF (Charge Input Mode)
[5] DC Coupling provide amplitude accuracy down to 0 Hz.
[6] Typical.
[7] User adjustable, factory set at 4 mA (± 1.0 mA). One control adjusts all channels.
[8] Auto sensing 10 base-T or 100 base-TX

English: SI:
Performance
Channels 4 4
Sensor Input Type(s) ICP®, Voltage, Charge ICP®, Voltage, Charge
Gain x0.1 to x1000 x0.1 to x1000
Voltage Gain x0.1 to x1000 x0.1 to x1000
Voltage Gain Increment 0.1 0.1
Accuracy (Gain, x0.1 to x0.4) ±5 % ±5 %
Accuracy (Gain, x0.5 to x0.99) ±1 % ±1 %
Accuracy (Gain, x1.0 to x1,000) 0.5 % 0.5 %
Sensitivity (±1 %) (Charge Input @ 100 Hz) 0.1 / 1.0 / 10.0 mV/pC 0.1 / 1.0 / 10.0 mV/pC
Insulation Resistance at Input (0.1) > 10 kOhm > 10 kOhm
Insulation Resistance at Input (1.0) > 100 kOhm > 100 kOhm
Insulation Resistance at Input (10.0) > 1 MOhm > 1 MOhm
Input Range (Charge Input, Nominal) ±100000 pC ±100000 pC
Output Range ±10 Vpk ±10 Vpk
Source Capacitance <5nF <5nF [4]
Frequency Range (-5 %) (>x100) 0.1 to 50,000 Hz 0.1 to 50,000 Hz [5]
Frequency Range (-5 %) (x0.1 to x99.9 Gain) 0.1 to 100,000 Hz 0.1 to 100,000 Hz [5]
Low Frequency Response (-5 %) (Charge Input) 0.5 Hz 0.5 Hz [1]
Electrical Filter Roll-off 80 dB/decade 80 dB/decade
Filter Type (Fourth-order Butterworth) Low Pass Low Pass
Electrical Filter Corner Frequency (-3 dB) 10 kHz 10 kHz [2] [3]
Electrical Filter Roll-off 24 dB/octave 24 dB/octave
Electrical Filter Pass Band Amplitude Accuracy 1 % 1 %
Electrical Filter Stop Band Attenuation (Minimum) 96 dB 96 dB
Phase Response (at 1 kHz) ±1 ° ±1 °
Cross Talk (maximum) -72 dB -72 dB
TEDS Sensor Support Yes Yes
Fault/Bias Monitor/Meter (LED) Open/Short/Overload Open/Short/Overload
Linearity (Charge Input) ±1 % FS ±1 % FS
Control Interface
Digital Control Interface USB-C (2.0) USB-C (2.0)
Digital Control Interface Ethernet Ethernet
Human Interface Keypad Keypad
Display 2 rows, 16 columns 2 rows, 16 columns
Digital Control: Cable Length (Maximum) 16.4 ft 5 m
Environmental
Temperature Range (Operating) +32 to +120 °F 0 to +50 °C
Electrical
Power Required (for supplied AC power adaptor) AC Power AC Power
Power Required (direct input to unit) DC Power DC Power
AC Power (50 to 60 Hz) 100 to 240 VAC 100 to 240 VAC
AC Power 1.6 Amps 1.6 Amps
DC Power +9 to +18 VDC +9 to +18 VDC
DC Power ≤2.5 Amps ≤2.5 Amps
Excitation Voltage (To Sensor) +24 VDC +24 VDC
DC Offset ≤50 mV ≤50 mV
Constant Current Excitation (To Sensor) 0 to 20 mA 0 to 20 mA [7]
Output Impedance ≤50 Ohm ≤50 Ohm
Discharge Time Constant (Charge Input) 1.0 sec 1.0 sec
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) 17 µV rms 17 µV rms [6]
Spectral Noise (1 Hz ) (Gain x1) 1.0 µV/√Hz 1.0 µV/√Hz [6]
Spectral Noise (10 Hz ) (Gain x1) 280 nV/√Hz 280 nV/√Hz [6]
Spectral Noise (100 Hz ) (Gain x1) 200 nV/√Hz 200 nV/√Hz [6]
Spectral Noise (1 kHz ) (Gain x1) 200 nV/√Hz 200 nV/√Hz [6]
Spectral Noise (10 kHz ) (Gain x1) 200 nV/√Hz 200 nV/√Hz [6]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) 32 µV rms 32 µV rms [6]
Spectral Noise (1 Hz ) (Gain x10) 7.9 µV/√Hz 7.9 µV/√Hz [6]
Spectral Noise (10 Hz ) (Gain x10) 630 nV/√Hz 630 nV/√Hz [6]
Spectral Noise (100 Hz ) (Gain x10) 400 nV/√Hz 400 nV/√Hz [6]
Spectral Noise (1 kHz ) (Gain x10) 350 nV/√Hz 350 nV/√Hz [6]
Spectral Noise (10 kHz ) (Gain x10) 350 nV/√Hz 350 nV/√Hz [6]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) 180 µV rms 180 µV rms [6]
Spectral Noise (1 Hz ) (Gain x10) 750 µV/√Hz 750 µV/√Hz [6]
Spectral Noise (10 Hz ) (Gain x100) 5.0 µV/√Hz 5.0 µV/√Hz [6]
Spectral Noise (100 Hz ) (Gain x100) 2.5 µV/√Hz 2.5 µV/√Hz [6]
Spectral Noise (1 kHz ) (Gain x100) 2.0 µV/√Hz 2.0 µV/√Hz [6]
Spectral Noise (10 kHz ) (Gain x100) 2.0 µV/√Hz 2.0 µV/√Hz [6]
Broadband Electrical Noise (1 to 10000 Hz) (0.1 mV/pC & Gain x1) 21 µV/rms 21 µV/rms [6]
Spectral Noise (1 Hz) (0.1 mV/pC & Gain x1) 700 nV/√Hz 700 nV/√Hz [6]
Spectral Noise (10 Hz) (0.1 mV/pC & Gain x1) 280 nV/√Hz 280 nV/√Hz [6]
Spectral Noise (100 Hz) (0.1 mV/pC & Gain x1) 250 nV/√Hz 250 nV/√Hz [6]
Spectral Noise (1000 Hz) (0.1 mV/pC & Gain x1) 220 nV/√Hz 220 nV/√Hz [6]
Spectral Noise (10000 Hz) (0.1 mV/pC & Gain x1) 220 µV/√Hz 220 µV/√Hz [6]
Spectral Noise (1 Hz) (1.0 mV/pC & Gain x1) 21 µV/√Hz 21 µV/√Hz [6]
Broadband Electrical Noise (1 to 10000 Hz) (10.0 mV/pC & Gain x1) 26 µV rms 26 µV rms [6]
Spectral Noise (10 Hz) (1.0 mV/pC & Gain x1) 280 nV/√Hz 280 nV/√Hz [6]
Spectral Noise (100 Hz) (1.0 mV/pC & Gain x1) 250 nV/√Hz 250 nV/√Hz [6]
Spectral Noise (1000 Hz) (1.0 mV/pC & Gain x1) 220 µV/√Hz 220 µV/√Hz [6]
Spectral Noise (10000 Hz) (1.0 mV/pC & Gain x1) 220 µV/√Hz 220 µV/√Hz [6]
Spectral Noise (1 Hz) (10.0 mV/pC & Gain x1) 7.0 µV/√Hz 7.0 µV/√Hz [6]
Spectral Noise (10 Hz) (10.0 mV/pC & Gain x1) 1.0 µV/√Hz 1.0 µV/√Hz [6]
Spectral Noise (100 Hz) (10.0 mV/pC & Gain x1) 280 nV/√Hz 280 nV/√Hz [6]
Spectral Noise (1000 Hz) (10.0 mV/pC & Gain x1) 250 nV/√Hz 250 nV/√Hz [6]
Spectral Noise (10000 Hz) (10.0 mV/pC & Gain x1) 250 nV/√Hz 250 nV/√Hz [6]
Calibration Input (±1 %) ±1000 pC/V ±1000 pC/V
Overload Threshold (±0.2 Vpk) +10 Vpk +10 Vpk
Physical
Electrical Connector (ICP® Sensor Input) BNC Jack BNC Jack
Electrical Connector (Charge Sensor Input) BNC Jack BNC Jack
Electrical Connector (Output) BNC Jack BNC Jack
Electrical Connector (DC Power Input) 6-socket mini DIN (female) 6-socket mini DIN (female)
Electrical Connector (Charge Calibration Input) BNC Jack BNC Jack
Electrical Connector (USB Digital Control) USB-C USB-C
Electrical Connector (Ethernet) RJ-45 RJ-45 [8]
Size - Width 8.0 in 20 cm
Size - Height 3.2 in 8.1 cm
Size - Depth 5.9 in 15 cm
Weight 2.50 lb 1134 gm

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
017AXX 1
100-18895-80 1
488B14/NC Universal AC power adapter, 100-240 VAC/ 50-60 Hz input, 12 VDC output, 6-pin mini DIN (for models 482C16 through 482C64), no line cord 1
EE75 1

Product Documents

Datasheet

Product Specifications

Product Manual

Product Drawing

Product Downloads

PCB_MCSC Software, EE75_Installer.zip

Software for signal conditioners - RS232 & Ethernet

Lantronix Installer

Ethernet Address Tool