Model: 482C24

Add to Cart for Quote
Datasheet

4-channel, line powered, ICP® sensor signal cond., AC/DC coupling, gain x0.1 to x200

  • Frequency Range: (-5%) 0.05 to 50000 Hz
  • DC Power: +9 to +18 VDC

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Channels4 4  
Sensor Input Type(s)ICP®, VoltageICP®, Voltage 
Voltage Gainx0.1 to x200x0.1 to x200 
Accuracy (Gain, x0.1 to x0.4)±5 %±5 % 
Accuracy (Gain, x0.5 to x200)±1 %±1 % 
Output Range±10 V±10 V 
Frequency Range (-5 %) (x100 to x200 Gain)0.05 to 50000 Hz0.05 to 50000 Hz 
Frequency Range (-5 %) (x0.1 to x99.9 Gain)0.05 to 100000 Hz0.05 to 100000 Hz[1] 
Phase Response (at 1 kHz)±1 °±1 ° 
Cross Talk (maximum)-72 dB-72 dB 
TEDS Sensor SupportYesYes 
Fault/Bias Monitor/Meter (LED)Open/Short/OverloadOpen/Short/Overload 
Control Interface
Digital Control InterfaceRS-232RS-232 
Human InterfaceKeypadKeypad 
Display2 rows, 16 columns2 rows, 16 columns 
Digital Control: Data Rate19200 bps19200 bps 
Digital Control: Start, Data, Stop, Parity1, 8, 1, No1, 8, 1, No 
Digital Control: HandshakingRTS/CTSRTS/CTS 
Digital Control: Cable Length (Maximum)50 ft15.2 m 
Environmental
Temperature Range (Operating)+32 to +120 °F0 to +50 °C 
Electrical
Power Required (for supplied AC power adaptor)AC PowerAC Power 
Power Required (direct input to unit)DC PowerDC Power 
AC Power (50 to 60 Hz)100 to 240 VAC100 to 240 VAC 
AC Power1.6 Amps1.6 Amps 
DC Power+9 to +18 VDC+9 to +18 VDC 
DC Power≤2.5 Amps≤2.5 Amps 
Excitation Voltage (To Sensor)+24 VDC+24 VDC 
DC Offset (AC Coupled)≤50 mV≤50 mV 
DC Offset (DC Coupled, Gain <100)<10 mV<10 mV 
DC Offset (DC Coupled, Gain ≥100)<20 mV<20 mV 
Constant Current Excitation (To Sensor)0 to 20 mA0 to 20 mA[2] 
Output Impedance≤50 Ohm≤50 Ohm 
Clamp FeatureActivated Activated [4] 
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1)50.0 µV rms50.0 µV rms[3] 
Spectral Noise (1 Hz ) (Gain x1)8.0 µV/√Hz8.0 µV/√Hz[3] 
Spectral Noise (10 Hz ) (Gain x1)1.5 µV/√Hz1.5 µV/√Hz[3] 
Spectral Noise (100 Hz ) (Gain x1)1.0 µV/√Hz1.0 µV/√Hz[3] 
Spectral Noise (1 kHz ) (Gain x1)1.0 µV/√Hz1.0 µV/√Hz[3] 
Spectral Noise (10 kHz ) (Gain x1)1.0 µV/√Hz1.0 µV/√Hz[3] 
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10)75.0 µV rms75.0 µV rms[3] 
Spectral Noise (1 Hz ) (Gain x10)20.0 µV/√Hz20.0 µV/√Hz[3] 
Spectral Noise (10 Hz ) (Gain x10)1.5 µV/√Hz1.5 µV/√Hz[3] 
Spectral Noise (100 Hz ) (Gain x10)1.0 µV/√Hz1.0 µV/√Hz[3] 
Spectral Noise (1 kHz ) (Gain x10)1.0 µV/√Hz1.0 µV/√Hz[3] 
Spectral Noise (10 kHz ) (Gain x10)1.0 µV/√Hz1.0 µV/√Hz[3] 
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100)350 µV rms350 µV rms[3] 
Spectral Noise (1 Hz ) (Gain x100)100.0 µV/√Hz100.0 µV/√Hz[3] 
Spectral Noise (10 Hz ) (Gain x100)10.0 µV/√Hz10.0 µV/√Hz[3] 
Spectral Noise (100 Hz ) (Gain x100)8.0 µV/√Hz8.0 µV/√Hz[3] 
Spectral Noise (1 kHz ) (Gain x100)6.0 µV/√Hz6.0 µV/√Hz[3] 
Spectral Noise (10 kHz ) (Gain x100)6.0 µV/√Hz6.0 µV/√Hz[3] 
Overload Threshold (±0.2 Vpk)+10 Vpk+10 Vpk 
Physical
Electrical Connector (ICP® Sensor Input)BNC JackBNC Jack 
Electrical Connector (Output)BNC JackBNC Jack 
Electrical Connector (DC Power Input)6-socket mini DIN (female)6-socket mini DIN (female) 
Electrical Connector (RS-232 Digital Control)DB-9 ConnectorDB-9 Connector 
Size - Height3.2 in8.1 cm 
Size - Width8.0 in20 cm 
Size - Depth5.9 in15 cm 
Weight2.00 lb908 gm 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] 0 Hz When DC Coupled
[2] User adjustable, factory set at 4 mA (± 1.0 mA). One control adjusts all channels.
[3] Typical, AC Coupled.
[4] See Manual
[5] See PCB Declaration of Conformance PS024 for details.
Accessories:
Supplied
017AXXPower Cord(1)
100-7103-50(02711) Multi-conductor cable, 6-ft, 9-pin female to 9-pin male.(1)
488B14/NCPOWER CONVERTOR(1)
EE75PCB MCSC Control Software.(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads
PCB_MCSC Software, EE75_Installer.zipSoftware for signal conditioners - RS232 & Ethernet
Lantronix InstallerEthernet Address Tool