Products

in-line charge converter, 0.5 mv/pc, +/-2.5v output, -5% frequency 0.5 hz

IN-LINE CHARGE CONVERTER

Model 422E05

Add to Quote
  • CE
  • IP

In-line charge converter, 0.5 mV/pC, +/-2.5V output, -5% frequency 0.5 Hz

  • Sensitivity: (±2%)0.50 mV/pC
  • Output Voltage: ±2.5 V
  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Housing Material: Stainless Steel

Specification Notes

[1] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate a charge output sensor.
[2] Not to be used with low values of source resistance such as charge mode sensors at elevated temperatures or contaminated sensor cables (preventing low frequency peaking and/or output bias problems).
[1] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate a charge output sensor.
[3] See PCB Declaration of Conformance PS024 for details. A low impendance connection from case to earth ground is required to maintain CE compliance.

English: SI:
Performance
Sensitivity (±2 %) (Charge Conversion) 0.50 mV/pC 0.50 mV/pC
Overrange ±3 V ±3 V
Low Frequency Response (-5 %) 0.5 Hz 0.5 Hz
High Frequency Response (2.2 mA) 30 kHz 30 kHz [1]
High Frequency Response (4 mA) 60 kHz 60 kHz [1]
High Frequency Response (20 mA) 100 kHz 100 kHz [1]
Non-Linearity ≤1.0 % FS ≤1.0 % FS
Environmental
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response (Sensitivity Deviation) <1 % <1 %
Maximum Shock 1000 g pk 9810 m/s² pk
Electrical
Excitation Voltage +18 to 28 VDC +18 to 28 VDC
Constant Current Excitation 2.2 to 20 mA 2.2 to 20 mA
Output Voltage (at specified measurement range) ±2.5 V ±2.5 V
Output Impedance <20 Ohm <20 Ohm
Output Bias Voltage +12.75 to 14.25 VDC +12.75 to 14.25 VDC
Output Polarity Inverted Inverted
Maximum Input Voltage 30 V 30 V
Broadband Electrical Noise (1 to 10000 Hz) 4.0 µV -108 dB [1]
Spectral Noise (1 Hz) 2.2 µV/√Hz -113 dB [1]
Spectral Noise (10 Hz) 0.2 µV/√Hz -134 dB [1]
Spectral Noise (100 Hz) 0.1 µV/√Hz -140 dB [1]
Spectral Noise (1 kHz) 0.04 µV/√Hz -148 dB [1]
Spectral Noise (10 kHz) 0.03 µV/√Hz -150 dB [1]
Discharge Time Constant 1.0 sec 1.0 sec
Resistance (Minimum required at input) 70000000 Ohm 70000000 Ohm [2]
Source Capacitance Loading 0.0005 %/pF 0.0005 %/pF
Physical
Housing Material Stainless Steel Stainless Steel
Sealing Welded Welded
Electrical Connector (Input) 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connector (Output) BNC Jack BNC Jack
Size - Diameter 0.52 in 13 mm
Size - Length 3.4 in 86 mm
Weight 1.1 oz 31 gm

* All specifications are at room temperature unless otherwise specified.

Optional Versions

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

English SI
Output Bias Voltage 13.35 to 14.85
Temperature Range -40 to +185 -40 to +85