Products

1/4-inch pressure prepolarized 377a12 microphone, with 1/4-inch preamplifier 426b03 and teds programmed

377A12 WITH 426B03 (TEDS)

Model 378A12

$1670.00 (USD)

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Lead Time for 1-10 is 6 Wks.
Lead Time for 11-20 is 7 Wks.
  • CE
  • IP

1/4-inch pressure prepolarized 377A12 microphone, with 1/4-inch preamplifier 426B03 and TEDS programmed

  • Nominal Microphone Diameter: 1/4"
  • Frequency Response Characteristic: Pressure
  • Frequency Range: (±2dB)5 to 20000 Hz (5 to 20000 Hz)
  • Dynamic Range: 182 dB re 20 µPa

Specification Notes


[1] Typical.
[2] TEDS Capable Digital Memory and Communication, compliant with IEEE 1451.4
[3] re 250 Hz
[1] Typical.
[3] re 250 Hz
[4] Limited to 70°C if ICP current >10mA
[5] Prepolarized
[1] Typical.
[6] Venting through Preamp.
[7] See PCB Declaration of Conformance PS167 and PS076 for details.

English: SI:
Performance
Nominal Microphone Diameter 1/4" 1/4"
Frequency Response Characteristic Pressure Pressure
Sensitivity (±3 dB) -72 dB re 1 V/Pa -72 dB re 1 V/Pa [3]
Sensitivity 0.25 mV/Pa 0.25 mV/Pa [3]
Frequency Range (±2 dB) 5 to 20000 Hz 5 to 20000 Hz
Lower Limiting Frequency (-3 dB) 0.75 to 4.0 Hz 0.75 to 4.0 Hz
Inherent Noise 60 dB(A) re 20 µPa 60 dB(A) re 20 µPa [1]
Dynamic Range (3% Distortion Limit) 182 dB re 20 µPa 182 dB re 20 µPa [1]
Maximum Sound Pressure Level(Peak) >194 dB re 20 µPa >194 dB re 20 µPa
TEDS Compliant Yes Yes [2]
Environmental
Temperature Range (Operating) -40 to +176 °F -40 to +80 °C [4]
Temperature Coefficient of Sensitivity (+14 to +158°F (-10 to +70°C)) 0.004 dB/°F 0.007 dB/°C [1] [3]
Static Pressure Coefficient -0.001 dB/kPa -0.001 dB/kPa [1] [3]
Humidity Coefficient of Sensitivity (0 to 100%, non-condensing) ±0.001 dB/%RH ±0.001 dB/%RH [3]
Influence of Axial Vibration (0.1g (1 m/s²)) 72 dB re 20 µPa 72 dB re 20 µPa [1]
Electrical
Polarization Voltage 0 V 0 V [5]
Excitation Voltage 20 to 32 VDC 20 to 32 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Bias Voltage 10 to 14 VDC 10 to 14 VDC
Maximum Output Voltage ±8 Vpk ±8 Vpk
Output Impedance <50 Ohm <50 Ohm
Physical
Housing Material Stainless Alloy Stainless Alloy
Venting Rear Rear [6]
Electrical Connector 10-32 Jack 10-32 Jack
Mounting Thread (Grid) 0.25 - 60 UNS 0.25 - 60 UNS
Size - Diameter (with grid) 0.28 in 7.1 mm
Size - Diameter (without grid) 0.25 in 6.35 mm
Size - Height (with grid) 2.07 in 52.6 mm
Size - Height (without grid) 2.02 in 51.3 mm
Weight 0.27 oz 7.8 gm [1]

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-63 Calibration for microphone/preamplifier with TEDS programming 1

Product Videos


Build Out Your Measurement Chain


079A53
Model: 079A53

Miniature Windscreen for 0.25 inch micro...

$33.00 USD

(Pricing valid only in the U.S.)

079A07
Model: 079A07

Windscreen (for 1/4-inch microphones)

$42.00 USD

(Pricing valid only in the U.S.)

079A15
Model: 079A15

Microphone stand (with boom attachment &...

$85.00 USD

(Pricing valid only in the U.S.)

079A18
Model: 079A18

Clamp-on flexible extension arm

$152.00 USD

(Pricing valid only in the U.S.)

079B10
Model: 079B10

Microphone holder (for 1/4-inch micropho...

$52.00 USD

(Pricing valid only in the U.S.)

079B32
Model: 079B32

1/4 inch array holder (for 1/2 inch diam...

$24.00 USD

(Pricing valid only in the U.S.)

079C20
Model: 079C20

Nose cone (for 1/4 inch microphone)

$357.00 USD

(Pricing valid only in the U.S.)