Model : 376A33 | PHANTOM POWER MICROPHONE SYSTEM

Call for lead time
patented phantom powered 48v, 24v or 12v, 377a06 microphone and 426a14 preamplifier system
Add to Cart for Quote

Patented phantom powered 48V, 24V or 12V, 377A06 microphone and 426A14 preamplifier system

  • Nominal Microphone Diameter: 1/2"
  • Frequency Response Characteristic: Free-Field
  • Frequency Range: (±3dB)3.15 to 40000 Hz
  • Dynamic Range: 150 dB re 20 µPa

RELATED PRODUCTS



079A49
079A49

Phantom powered microphone holder 20mm dia with 5/8-27



Add to Cart for Quote
Add to Cart
079A06
079A06

Windscreen (for 1/2-inch microphones)



Add to Cart for Quote
Add to Cart
079A15
079A15

Microphone stand (with boom attachment & adaptor)



Add to Cart for Quote
Add to Cart
079A18
079A18

Clamp-on flexible extension arm



Add to Cart for Quote
Add to Cart
079B21
079B21

1/2-inch nose cone



Add to Cart for Quote
Add to Quote
English: SI:
Performance
Nominal Microphone Diameter 1/2" 1/2"
Frequency Response Characteristic (at 0° incidence) Free-Field Free-Field
Sensitivity (±2 dB) -38 dB re 1 V/Pa -38 dB re 1 V/Pa [ 2]
Sensitivity 12.6 mV/Pa 12.6 mV/Pa [ 2]
Frequency Range (±3 dB) 3.15 to 40000 Hz 3.15 to 40000 Hz
Frequency Range (±2 dB) 3.15 to 31500 Hz 3.15 to 31500 Hz
Frequency Range (±1 dB) 5 to 16000 Hz 5 to 16000 Hz
Lower Limiting Frequency (3) 1.0 to 2.4 Hz 1.0 to 2.4 Hz
Inherent Noise 22 dB(A) re 20 µPa 22 dB(A) re 20 µPa [ 1] [ 3]
Dynamic Range (3% Distortion Limit) 150 dB re 20 µPa 150 dB re 20 µPa [ 1]
Environmental
Temperature Range (Operating) -40 to +149 °F -40 to +65 °C
Temperature Coefficient of Sensitivity (+14 to +149°F (-10 to 65°C)) 0.003 dB/°F 0.006 dB/°C [ 1] [ 2]
Static Pressure Coefficient -0.007 dB/kPa -0.007 dB/kPa [ 1] [ 2]
Humidity Coefficient of Sensitivity (0 to 100%, non-condensing) 0.002 dB/%RH 0.002 dB/%RH [ 1] [ 2]
Influence of Axial Vibration (0.1g (1 m/s²)) 66 dB re 20 µPa 66 dB re 20 µPa [ 1]
Electrical
Polarization Voltage 0 V 0 V [ 4]
Current Draw 6.5 mA 6.5 mA [ 1]
Maximum Output Voltage ±10 Vpk ±10 Vpk
Output Impedance <50 Ohm <50 Ohm
Physical
Housing Material Stainless Alloy Stainless Alloy
Venting Rear Rear
Electrical Connector 3-Pin XLR 3-Pin XLR
Mounting Thread (Grid) 0.5 - 60 UNS 0.5 - 60 UNS
Size - Diameter (with grid) 0.79 in 20.1 mm
Size - Height (with grid) 6.85 in 174.0 mm
Weight 6.45 oz 183.0 gm [ 1]
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] Typical.
[ 2] re 250 Hz
[ 3] A-Weighted inherent noise is specified from 20 Hz - 20 kHz.
[ 1] Typical.
[ 2] re 250 Hz
[ 1] Typical.
[ 4] Prepolarized
[ 1] Typical.
[ 5] See PCB Declaration of Conformance PS147 and PS167 for details.


Accessories


Supplied
079A49 Phantom powered microphone holder 20mm dia with 5/8-27 1
64443-01 1
64444-01 1
ACS-42 Calibration of a Series 377 (Type 1) microphone & preamp, as mated pair 1