Model : 3713F1150G | Triaxial DC Response Accelerometer

Call for lead time
platinum stock products; triaxial mems dc accelerometer, 27 mv/g, 50 g, 9-pin socket
$ 1,850.00 USD
(Pricing valid in US only!)
3 units in stock
Datasheet

Platinum Stock Products; Triaxial MEMS DC accelerometer, 27 mV/g, 50 g, 9-pin socket

  • Sensitivity: (±3%)27 mV/g ( 2.8 mV/(m/s²))
  • Measurement Range: ±50 g pk ( ±490 m/s² pk)
  • Electrical Connector: 9-Pin ( 9-Pin)
  • Weight: 0.6 oz ( 17.3 gm)

RELATED PRODUCTS

482C27
482C27

4-channel, line-powered, bridge/differential/ICP® sensor signal cond., incremental gain, Autozero, RS-232, Ethernet



Add to Cart for Quote
Add to Quote
483C28
483C28

8-channel, line-powered, bridge/differential/ICP® sensor signal cond., incremental gain, Autozero, Ethernet



Add to Cart for Quote
Add to Quote
037A10
037A10

10-conductor, 28 awg (40/44), shielded, polyurethane cable, 10-ft, 9-socket plug to (3) 4-socket plugs (AY)



Add to Cart for Quote
Add to Quote
037P10
037P10

10-conductor, 28 awg (40/44), shielded, polyurethane cable, 10-ft, 9-socket plug to pigtails



Add to Cart for Quote
Add to Cart
080A27
080A27

High-strength, rare earth magnetic base, 0.75" hex, 12 lbf, 10-32 thd



Add to Cart for Quote
Add to Cart
080A12
080A12

Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish



Add to Cart for Quote
Add to Cart
081B05
081B05

Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder



Add to Cart for Quote
Add to Cart
M081B05
M081B05

Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu



Add to Cart for Quote
Add to Cart
EN
EN

9-socket plug (for DC triaxial accels) **Requires special tooling for assembly – No sales except PCB locations that have the tooling and procedures**



Add to Cart for Quote
Add to Quote
English: SI:
Performance
Sensitivity (±3 %) 27 mV/g 2.8 mV/(m/s²) [ 3]
Measurement Range ±50 g pk ±490 m/s² pk
Frequency Range (±5 %) 0 to 1500 Hz 0 to 1500 Hz
Frequency Range (±10 %) 0 to 2000 Hz 0 to 2000 Hz
Resonant Frequency 6.5 kHz 6.5 kHz [ 2]
Phase Response (100 Hz) <10 ° <10 °
Non-Linearity ≤1 % ≤1 % [ 1]
Broadband Resolution (0.5) 1.5 mg rms 0.015 m/s² rms [ 2]
Transverse Sensitivity ≤3 % ≤3 %
Environmental
Overload Limit (Shock) ±3000 g pk ±29420 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54.0 to +121 °C
Temperature Range (Storage) -65 to +250 °F -54.0 to +121 °C
Temperature Coefficient of Sensitivity ±2.5 % ±2.5 % [ 4]
Zero g Offset Temperature Coefficient ±1.5 % FSO ±1.5 % FSO [ 4] [ 5]
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [ 2]
Magnetic Sensitivity 40 µg/gauss 3.9 (m/s²)/Tesla [ 2]
Electrical
Excitation Voltage 5 to 32 VDC 5 to 32 VDC
Current Consumption ≤15 mA ≤15 mA
Output Impedance ≤120 Ohm ≤120 Ohm
Offset Voltage ±20 mVDC ±20 mVDC [ 6]
Spectral Noise 250 µg/√Hz 2453 (µm/sec2)/√Hz [ 2]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Length 0.8 in 20.3 mm
Size - Width 0.8 in 20.3 mm
Size - Height 0.8 in 20.3 mm
Weight 0.6 oz 17.3 gm
Electrical Connector 9-Pin 9-Pin
Electrical Connection Position Side Side
Mounting Thread 10-32 Female 10-32 Female
* All specifications are at room temperature unless otherwise specified
.




Specification Notes

[ 1] Zero-based, least-squares, straight line method.
[ 2] Typical.
[ 3] Measured at 100 Hz, 10 grms.
[ 2] Typical.
[ 4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[ 5] FSO= Full Scale Output over the Measurement Range
[ 2] Typical.
[ 6] Offset tolerance is based on 10 ft of 037 test cable.
[ 7] See PCB Declaration of Conformance PS027 for details.


Accessories
Supplied
ACS-172T 1
080A12 Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insulating hardcoat finish 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
M081B05 Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu 1