Model : 3711F1130G | DC Response Accelerometer

Call for lead time
$ 825.00 USD
(Pricing valid in US only!)
37 units in stock
Datasheet

Platinum Stock Products; Single Axis MEMS DC accelerometer, 45 mV/g, 30 g, 1/4-28 4-Pin Plug

  • Sensitivity: (±3%)45 mV/g (4.59 mV/(m/s²))
  • Measurement Range: ±30 g pk (±294.2 m/s² pk)
  • Broadband Resolution: 1 mg rms (0.01 m/s² rms)
  • Temperature Range: -65 to +250 °F (-54.0 to +121 °C)
  • Frequency Range: (±5%)0 to 1500 Hz
  • Electrical Connector: 4-Pin (4-Pin)

RELATED PRODUCTS

482C27

4-channel, line-powered, bridge/differential/ICP® sensor signal cond., incremental gain, Autozero, RS-232, Ethernet



Add to Cart for Quote
Add To Quote
483c28

8-channel, line-powered, bridge/differential/ICP® sensor signal cond., incremental gain, Autozero, Ethernet



Add to Cart for Quote
Add To Quote
010D10

4-conductor, shielded, FEP cable, 10-ft, 4-socket plug to 4-socket plug



Add to Cart for Quote
Add To Cart
010P10

4-conductor, shielded, FEP cable, 10-ft, 4-socket plug to pigtail (for use w/ 3711 series accels)



Add to Cart for Quote
Add To Cart
080A153

Easy mount triaxial block, plastic, 1.265" sq.



Add to Cart for Quote
Add To Quote
080A152

Easy Mount Clip for Series 3701 and 3711 DC Response Accelerometers



Add to Cart for Quote
Add To Cart
081A113

4-40 threaded stainless steel socket head cap screw with stainless steel washer for 3711 Series accelerometers (not off-ground)



Add to Cart for Quote
Add To Cart
M081A113

M2.5x0.45 threaded stainless steel socket head cap screw with stainless steel washer for 3711 Series accelerometers (not off-ground)



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Sensitivity (±3 %) 45 mV/g 4.59 mV/(m/s²) [4]
Measurement Range ±30 g pk ±294.2 m/s² pk
Frequency Range (±5 %) 0 to 1500 Hz 0 to 1500 Hz
Frequency Range (±10 %) 0 to 2000 Hz 0 to 2000 Hz
Resonant Frequency 5.2 kHz 5.2 kHz [2]
Phase Response (100 Hz) <10 ° <10 °
Broadband Resolution (0.5) 1 mg rms 0.01 m/s² rms [3]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤3 % ≤3 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54.0 to +121 °C
Temperature Range (Storage) -65 to +250 °F -54.0 to +121 °C
Temperature Coefficient of Sensitivity ±2.5 % ±2.5 % [5]
Zero g Offset Temperature Coefficient ±1.5 % FSO ±1.5 % FSO [5] [6]
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [3]
Magnetic Sensitivity 40 µg/gauss 3.9 (m/s²)/Tesla [3]
Electrical
Excitation Voltage 5 to 32 VDC 5 to 32 VDC
Current Consumption ≤5 mA ≤5 mA
Output Impedance ≤120 Ohm ≤120 Ohm
Offset Voltage +/-20 mVDC +/-20 mVDC [7]
Spectral Noise 120 µg/√Hz 1177 (µm/sec2)/√Hz [3]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.45 in 11.4 mm
Size - Length 0.85 in 21.6 mm
Size - Width 0.85 in 21.6 mm
Weight 0.58 oz 16.3 gm
Electrical Connector 4-Pin 4-Pin
Electrical Connection Position Side Side
Mounting Through Hole Through Hole
* All specifications are at room temperature unless otherwise specified
.


Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical value.
[3] Typical.
[4] Measured at 100 Hz, 1 grms.
[3] Typical.
[5] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[6] FSO= Full Scale Output over the Measurement Range
[3] Typical.
[7] Offset tolerance is based on 10 ft of 010 test cable.
[8] See PCB Declaration of Conformance PS027 for details.


Accessories
Supplied
ACS-172 1
080A152 Easy Mount Clip for Series 3701 and 3711 DC Response Accelerometers 1
081A113 4-40 threaded stainless steel socket head cap screw with stainless steel washer for 3711 Series accelerometers (not off-ground) 2
M081A113 M2.5x0.45 threaded stainless steel socket head cap screw with stainless steel washer for 3711 Series accelerometers (not off-ground) 2