Products

low outgassing, triaxial, high sensitivity, ceramic shear icp® accel., 500 mv/g, 0.5 to 3k hz, titanium hsg, 4-pin conn.

TRIAXIAL ACCELEROMETER

Model 356M132

Add to Quote
  • CE
  • IP

Low Outgassing, Triaxial, high sensitivity, ceramic shear ICP® accel., 500 mV/g, 0.5 to 3k Hz, titanium hsg, 4-pin conn.

This accelerometer features low out-gassing construction that is ideal for use in thermal vacuum chambers for environmental testing.
  • Sensitivity: (±10%)500 mV/g (51 mV/(m/s²))
  • Measurement Range: ±10 g pk (±98 m/s² pk)
  • Electrical Connector: 1/4-28 4-Pin

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 500 mV/g 51 mV/(m/s²)
Measurement Range ±10 g pk ±98 m/s² pk
Frequency Range (±5 %) 0.5 to 3000 Hz 0.5 to 3000 Hz
Frequency Range (±10 %) 0.3 to 4000 Hz 0.3 to 4000 Hz
Resonant Frequency ≥14 kHz ≥14 kHz
Broadband Resolution (1) 0.00006 g rms 0.0006 m/s² rms [2]
Phase Response (±5 °) (at 70°F [21°C]) 2 to 4000 Hz 2 to 4000 Hz
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49000 m/s² pk
Temperature Range (Operating) -65 to +176 °F -54 to +80 °C
Temperature Response See Graph %/°F See Graph %/°F
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤300 Ohm ≤300 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.8 to 2.0 sec 0.8 to 2.0 sec
Settling Time (within 10% of bias) <10 sec <10 sec
Spectral Noise (1 Hz) 18 µg/√Hz 180 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 6 µg/√Hz 60 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 2 µg/√Hz 20 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 0.7 µg/√Hz 7 (µm/sec2)/√Hz [2]
Spectral Noise (10 kHz) 0.2 µg/√Hz 2 (µm/sec2)/√Hz [2]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.55 in 14.0 mm
Size - Length 0.80 in 20.3 mm
Size - Width 0.55 in 14.0 mm
Weight 0.42 oz 11.8 gm [2]
Electrical Connector 1/4-28 4-Pin 1/4-28 4-Pin
Electrical Connection Position Side Side
Mounting Thread 5-40 Female 5-40 Female
Mounting Torque 4 to 5 in-lb 45 to 56 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A145 Adhesive mtg base, 0.75" hex x 0.2" thk, 5-40 tapped hole, w/isolating hardcoat finish 1
081A27 Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
M081A27 Metric mtg stud, 5-40 to M3 x 0.50 long 1

Optional Versions

(A) Adhesive Mount
Accessories:
Supplied 080A109 Petro Wax 1
Supplied 080A90 Quick Bonding Gel 1
Supplied ACS-1T NIST traceable triaxial amplitude response, 10 Hz to upper 5% frequency. 1

(TLA) TEDS LMS International - Free Format

English SI
Output Bias Voltage 8.5 to 13

(TLB) TEDS LMS International - Automotive Format

English SI
Output Bias Voltage 8.5 to 13

(TLC) TEDS LMS International - Aeronautical Format

English SI
Output Bias Voltage 8.5 to 13

Build Out Your Measurement Chain