Products

3 wire iepe accelerometer

ACCELEROMETER

Model 355M65

Add to Quote
  • IP

3 wire IEPE Accelerometer

  • Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±200 g pk (±1962 m/s² pk)
  • Broadband Resolution: 0.004 g rms (0.04 m/s² rms)
  • Electrical Connection Position: Side
  • Weight: 1.2 oz (33.2 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.

English: SI:
Performance
Sensitivity (±10 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ±200 g pk ±1962 m/s² pk
Frequency Range (±5 %) 20 to 2000 Hz 20 to 2000 Hz
Frequency Range (≤-3 dB) 4 kHz 4 kHz
Frequency Range (≤-30 dB) 10 kHz 10 kHz
Resonant Frequency ≥30 kHz ≥30 kHz
Transverse Sensitivity ≤5.0 % ≤5.0 %
Broadband Resolution (1) 0.004 g rms 0.04 m/s² rms [2]
Non-Linearity ≤1.0 % ≤1.0 % [1]
Environmental
Overload Limit ±5000 g pk ±49050 m/s² pk
Temperature Range -65 to 250 °F -53.9 to 121 °C
Temperature Response ≤0.11 %/°F ≤0.20 %/°C
Electrical
Excitation Voltage 24 to 32 VDC 24 to 32 VDC
Current Consumption ≤10 mA ≤10 mA
Output Impedance ≤1000 Ohm ≤1000 Ohm
Output Bias Voltage 2.45 to 2.65 VDC 2.45 to 2.65 VDC
Electrical Isolation (Case) ≥100000 Ohm ≥100000 Ohm
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Size - Height 0.63 in 16 mm
Size - Length 1.9 in 48.3 mm
Size - Width 0.85 in 21.6 mm
Weight (without cable) 1.2 oz 33.2 gm [2]
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Cable Termination Pigtail Ends Pigtail Ends
Cable Length 3 ft 0.9 m
Cable Type 010 4-cond Shielded 010 4-cond Shielded
Mounting Through Hole Through Hole
Mounting Torque 10 to 20 in-lb 113 to 225 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
081M159 SCREW 8-32 x 7/8" SHCS 18-8 SS Specially Machined 1
100-8119-10 1
100-8120-80 1
ACS-111 Accelerometer Calibration, 10 Hz to 3 dB point, Reference to 100 Hz, with temperature coefficient at 70 C and 121 C. 1
ACS-111A Custom certification to verify sensor dimensions, wire color, bias voltage, etc., per accelerometer model requirements 1