Model: 355M87A

$2,100.00 USD
(Pricing valid in US only)


Miniature ring-style, ceramic shear CVLD accel., 100 uA/g, 7 to 10k Hz, 20 ft integral cable, blunt cut, case isolated. (ITAR controlled)

Waterproof, pressure tested cables over-molded directly to the sensor

  • Sensitivity: (±10%) 100 µA/g (10.2 µA/(m/s²))
  • Measurement Range: ±50 g pk (±491 m/s² pk)
  • Broadband Resolution: 0.004 g rms (0.04 m/s² rms)
  • Frequency Range: (±5%) 7 to 9000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.14 oz (4.1 gm)

Add this product to my product comparison
Compare selected models ()

Additional Configurations:
 English:SI: 
Performance
Sensitivity (±10 %)100 µA/g10.2 µA/(m/s²) 
Measurement Range±50 g pk±491 m/s² pk 
Frequency Range (±5 %)7 to 9000 Hz7 to 9000 Hz 
Frequency Range (±10 %)5 to 11000 Hz5 to 11000 Hz 
Frequency Range (±3 dB)3 to 20000 Hz3 to 20000 Hz 
Resonant Frequency≥40 kHz≥40 kHz 
Broadband Resolution (500 to 50000 Hz)0.004 g rms0.04 m/s² rms[2] 
Non-Linearity≤1 %≤1 %[1] 
Transverse Sensitivity≤5 %≤5 % 
Environmental
Overload Limit±5000 g pk±49050 m/s² pk 
Temperature Range0 to 225 °F-18 to 107 °C 
Base Strain Sensitivity0.008 g/µε0.08 (m/s²)/µε[2] 
Electrical
Excitation Voltage (±0.5 VDC)15 VDC15 VDC 
Discharge Time Constant0.07 to 1.0 sec0.07 to 1.0 sec 
Bias Current7 to 12 mA 7 to 12 mA  
Spectral Noise (1 kHz)1.846 µg/√Hz18.48 (µm/sec2)/√Hz[2] 
Spectral Noise (10 kHz)1.744 µg/√Hz17.44 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)≥100000000 Ohm≥100000000 Ohm 
Physical
Size - Height.32 in8.1  
Weight (without cable)0.14 oz4.1 gm[2] 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialTitaniumTitanium 
SealingHermeticHermetic 
Size - Length1.32 in33.5 mm 
Size - Width0.46 in11.7 mm 
Electrical ConnectorSealed Integral Cable Sealed Integral Cable [3] 
Electrical Connection PositionSideSide 
Cable TerminationBlunt cutBlunt cut 
Cable Length20.0 ft6.1 m 
Cable TypeSB-49123SB-49123 
MountingThrough HoleThrough Hole 
Mounting Torque1 to 2 in-lb11 to 23 N-cm 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Hydrostatically tested
Accessories:
Supplied
100-8002-20#1 SS Washer(1)
37642-01Screw 1-72 X .41 SHCS SS(1)
ACS-159NIST traceable frequency response (50 Hz to upper 5% point)(1)
ACS-7Single axis high frequency, amplitude response cal from 100 to 50k Hz (for accels up to 12 gm) (Requires ACS-1 or Equivalent)(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads