Products

miniature, lightweight (0.7 gm), ceramic shear icp® accel., 1 mv/g, 2 to 10k hz, 10-ft integral cable

ACCELEROMETER

Model 352B01

Miniature, lightweight (0.7 gm), ceramic shear ICP® accel., 1 mV/g, 2 to 10k Hz, 10-ft integral cable

Sensitivity: (±20%)1.0 mV/g (0.10 mV/(m/s²))
Measurement Range: ±5000 g pk (±49050 m/s² pk)
Broadband Resolution: 0.02 g rms (0.2 m/s² rms)
Frequency Range: (±5%)2 to 10000 Hz
Sensing Element: Ceramic
Weight: 0.03 oz (0.7 gm)

Additional configurations:

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] 250° F to 325° F data valid with HT option only.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±20 %)	1.0 mV/g	0.10 mV/(m/s²)
Measurement Range	±5000 g pk	±49050 m/s² pk
Frequency Range (±5 %)	2 to 10000 Hz	2 to 10000 Hz
Frequency Range (±10 %)	1 to 20000 Hz	1 to 20000 Hz
Resonant Frequency	≥65 kHz	≥65 kHz
Broadband Resolution (1)	0.02 g rms	0.2 m/s² rms	[2]
Non-Linearity	≤1 %	≤1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±10000 g pk	±98100 m/s² pk
Temperature Range (Operating)	-65 to +250 °F	-54 to +121 °C	[3]
Temperature Response	See Graph %/°F	See Graph %/°F	[2] [3]
Electrical
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤200 Ohm	≤200 Ohm
Output Bias Voltage	7 to 12 VDC	7 to 12 VDC
Discharge Time Constant	0.3 to 1.0 sec	0.3 to 1.0 sec
Physical
Size - Height	0.32 in	8.1 mm
Weight (without cable)	0.03 oz	0.7 gm	[2]
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Welded Hermetic	Welded Hermetic
Size - Diameter	0.24 in	6.1 mm
Electrical Connector	Solder pins with attached cable	Solder pins with attached cable
Electrical Connection Position	Top	Top
Cable Length	10 ft	3 m
Cable Type	030 Coaxial	030 Coaxial
Mounting	Adhesive	Adhesive

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A90	Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)	1
ACS-1	Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable	1