Products

low profile, miniature (2.8 gm), ceramic shear icp® accel., 10 mv/g, 1 hz to 10k hz

Accelerometer, ICP®

Model 352C41

  • CE
  • IP

Low profile, miniature (2.8 gm), ceramic shear ICP® accel., 10 mV/g, 1 Hz to 10k Hz

  • Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4905 m/s² pk)
  • Broadband Resolution: 0.0008 g rms (0.008 m/s² rms)
  • Frequency Range: (±5%)1.0 to 9000 Hz (1.0 to 9000 Hz)
  • Sensing Element: Ceramic
  • Weight: 0.10 oz (2.8 gm)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ±500 g pk ±4905 m/s² pk
Frequency Range (±5 %) 1.0 to 9000 Hz 1.0 to 9000 Hz
Frequency Range (±10 %) 0.5 to 10000 Hz 0.5 to 10000 Hz
Frequency Range (±3 dB) 0.3 to 15000 Hz 0.3 to 15000 Hz
Resonant Frequency ≥30 kHz ≥30 kHz
Broadband Resolution (1) 0.0008 g rms 0.008 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 % [3]
Environmental
Overload Limit ±5000 g pk ±49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Electrical
Excitation Voltage 22 to 30 VDC 22 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage 8 to 15 VDC 8 to 15 VDC
Discharge Time Constant 0.5 to 2.0 sec 0.5 to 2.0 sec
Settling Time <10 sec <10 sec
Spectral Noise (1 Hz) 200 µg/√Hz 1962 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 60 µg/√Hz 589 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 15 µg/√Hz 147 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 8 µg/√Hz 79 (µm/sec2)/√Hz [2]
Physical
Size - Height 0.38 in 9.7 mm
Size - Hex 0.38 in 9.7 mm
Weight 0.10 oz 2.8 gm [2]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Top Top
Mounting Adhesive Adhesive

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
ACS-1 Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable 1

Build Out Your Measurement Chain


002C10
Model: 002C10

General purpose coaxial cable, white FEP...

$57.00 USD

(Pricing valid only in the U.S.)

003C10
Model: 003C10

Low-noise coaxial cable, blue TFE jacket...

$60.00 USD

(Pricing valid only in the U.S.)