Model: 352B70

Add to Cart for Quote

Click for lead times

Ceramic shear ICP® accel., 1 mV/g, 5000 g range, 0.7 to 9 kHz, filtered, base isolated, 10-32 top conn

  • Sensitivity: (±25%) 1 mV/g (0.1 mV/(m/s²))
  • Measurement Range: ±5000 g pk (±49000 m/s² pk)
  • Broadband Resolution: 0.025 g rms (0.25 m/s² rms)
  • Sensing Element: Ceramic
  • Weight: 0.15 oz (4.3 gm)

Add this product to my product comparison
Compare selected models ()

Sensitivity (±25 %)1 mV/g0.1 mV/(m/s²) 
Measurement Range±5000 g pk±49000 m/s² pk 
Frequency Range (±5 %)0.7 to 9000 Hz0.7 to 9000 Hz 
Frequency Range (-3 dB)0.4 to 20000 Hz0.4 to 20000 Hz 
Filter TypeLow PassLow Pass 
Electrical Filter Corner Frequency23 kHz23 kHz[2] 
Electrical Filter Roll-off12 dB/octave12 dB/octave 
Resonant Frequency≥55 kHz≥55 kHz 
Broadband Resolution (1 to 10000 Hz)0.025 g rms0.25 m/s² rms[2] 
Non-Linearity≤1 %≤1 %[1] 
Transverse Sensitivity≤7 %≤7 % 
Overload Limit (Shock)±10000 g pk±98000 m/s² pk 
Temperature Range (Operating)-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Excitation Voltage20 to 30 VDC20 to 30 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance≤200 ≤200  
Output Bias Voltage8 to 14 VDC8 to 14 VDC 
Discharge Time Constant0.5 to 1.5 sec0.5 to 1.5 sec 
Settling Time (within 10% of bias)<5 sec<5 sec 
Spectral Noise (1 Hz)7200 µg/√Hz70600 (µm/sec2)/√Hz[2] 
Spectral Noise (10 Hz)2400 µg/√Hz23500 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)740 µg/√Hz7250 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)190 µg/√Hz1860 (µm/sec2)/√Hz[2] 
Electrical Isolation (Base)>100000000 >100000000  
Size - Height0.90 in22.9 mm 
Weight0.15 oz4.3 gm[2] 
Sensing ElementCeramicCeramic 
Size - Hex3/8 in3/8 in 
Sensing GeometryShearShear 
Housing MaterialTitaniumTitanium 
Electrical Connector10-32 Coaxial Jack10-32 Coaxial Jack 
Electrical Connection PositionTopTop 
Mounting Thread10-32 Female10-32 Female 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
080A04Adhesive base, 0.37" hex x 0.2" thick, 10-32 tapped hole, aluminum with insulating hardcoat finish(1)
081B05Mounting Stud (10-32 to 10-32)(1)
ACS-23NIST Traceable frequency response (5Hz to +5% PT, Linear Scale +/-10%)(1)
M081B05Mounting Stud 10-32 to M6 X 0.75(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads None Listed