High amplitude, triaxial ICP® accel., 0.5 mV/g, 10k g range, w/built-in 2nd order low-pass filter (-3dB at 20 kHz)
- Sensitivity: (±30%)0.5 mV/g
(0.05 mV/(m/s²))
- Measurement Range: ±10000 g pk
(±98000 m/s² pk)
- Electrical Connector: Integral Cable
RELATED PRODUCTS
|
English: |
SI: |
|
Performance |
Sensitivity (±30 %) |
0.5 mV/g |
0.05 mV/(m/s²) |
|
Measurement Range |
±10000 g pk |
±98000 m/s² pk |
|
Frequency Range (±1 dB) |
3 to 10000 Hz |
3 to 10000 Hz |
|
Frequency Range (-3 dB) |
1.5 to 20000 Hz |
1.5 to 20000 Hz |
[3]
|
Resonant Frequency |
≥60 kHz |
≥60 kHz |
|
Broadband Resolution (1) |
0.03 g rms |
0.29 m/s² rms |
[2]
|
Non-Linearity (per 1000 g (9810 m/s2)) |
≤2 % |
≤2 % |
[1]
|
Transverse Sensitivity |
≤5 % |
≤5 % |
|
Environmental |
Overload Limit (Shock) |
±25000 g pk |
±245000 m/s² pk |
|
Temperature Range (Operating) |
-65 to +250 °F |
-54 to +121 °C |
|
Temperature Response |
See Graph %/°F |
See Graph %/°F |
[2]
|
Electrical |
Excitation Voltage |
18 to 30 VDC |
18 to 30 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
≤100 Ohm |
≤100 Ohm |
|
Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
Discharge Time Constant |
0.5 to 1.0 sec |
0.5 to 1.0 sec |
|
Settling Time (within 10% of bias) |
<5 sec |
<5 sec |
|
Electrical Isolation (Base) |
>100000000 Ohm |
>100000000 Ohm |
|
Physical |
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Titanium |
Titanium |
|
Sealing |
Hermetic |
Hermetic |
|
Size - Height |
0.32 in |
8.2 mm |
|
Size - Length |
0.72 in |
18.3 mm |
|
Size - Width |
0.72 in |
18.3 mm |
|
Weight (without cable) |
0.3 oz |
8.0 gm |
[2]
|
Electrical Connector |
Integral Cable |
Integral Cable |
|
Electrical Connection Position |
Side |
Side |
|
Cable Termination |
1/4-28 4-Pin Jack |
1/4-28 4-Pin Jack |
|
Cable Length |
5.0 ft |
1.52 m |
|
Cable Type |
034 4-cond Shielded |
034 4-cond Shielded |
|
Mounting |
Through Hole |
Through Hole |
|
* All specifications are at room temperature unless otherwise specified
.


Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Electrical filter is a second order filter.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.
Accessories
|
|
|
Supplied |
034G05 |
4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z) |
1 |
080A197 |
Mounting Adaptor, through hole for 350B50 |
1 |
080B197 |
Mounting Adaptor, through hole for 350B50 |
1 |
ACS-14T |
|
1 |
ACS-22T |
Triaxial amplitude response calibration for shock accelerometer, 100 Hz to upper 1 dB frequency (max 15 kHz) |
1 |
081A112 |
Socket head cap screw assembly, 6-32 thread with off ground washer and tube |
4 |