ICP® Triaxial shock accelerometer, 0.1 mV/g, 50k g range, mechanically isolated and electrically filtered, 5-ft integral cable
- Sensitivity: (±30%).1 mV/g
(.01 mV/(m/s²))
- Measurement Range: ±50000 g pk
(±440000 m/s² pk)
- Frequency Range: (±1dB)4 to 10000 Hz
RELATED PRODUCTS
|
English: |
SI: |
|
Performance |
Sensitivity (±30 %) |
.1 mV/g |
.01 mV/(m/s²) |
|
Measurement Range |
±50000 g pk |
±440000 m/s² pk |
|
Frequency Range (±1 dB) |
4 to 10000 Hz |
4 to 10000 Hz |
|
Resonant Frequency |
>50 kHz |
>50 kHz |
|
Electrical Filter Corner Frequency (3) |
17 kHz |
17 kHz |
[1]
[2]
|
Mechanical Filter Resonant Frequency |
35 kHz |
35 kHz |
[1]
[3]
|
Broadband Resolution (1) |
0.5 g rms |
4.9 m/s² rms |
[1]
|
Non-Linearity (10,000 g, 98,100 m/s²) |
2.5 % |
2.5 % |
|
Transverse Sensitivity |
≤7 % |
≤7 % |
|
Environmental |
Overload Limit (Shock) |
±150000 g pk |
±1471500 m/s² pk |
|
Temperature Range (Operating) |
-10 to +150 °F |
-23 to +66 °C |
|
Temperature Range (Storage) |
-40 to +200 °F |
-40 to +93 °C |
|
Temperature Response |
See Graph %/°F |
See Graph %/°F |
[1]
[4]
|
Base Strain Sensitivity |
0.002 g/µε |
0.02 (m/s²)/µε |
[1]
|
Electrical |
Excitation Voltage |
20 to 30 VDC |
20 to 30 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
≤200 Ohm |
≤200 Ohm |
|
Output Bias Voltage |
8 to 14 VDC |
8 to 14 VDC |
|
Discharge Time Constant |
0.1 sec |
0.1 sec |
[1]
|
Settling Time (within 10% of bias) |
<1 sec |
<1 sec |
|
Electrical Isolation (Case) |
>100000000 Ohm |
>100000000 Ohm |
|
Physical |
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Titanium |
Titanium |
|
Sealing |
Hermetic |
Hermetic |
|
Size - Height |
1.02 in |
26.0 mm |
|
Size - Length |
1.02 in |
26.0 mm |
|
Size - Width |
1.02 in |
26.0 mm |
|
Weight (without cable) |
0.95 oz |
27 g |
[1]
|
Electrical Connection Position |
Side |
Side |
|
Cable Termination |
1/4-28 4-Pin Jack |
1/4-28 4-Pin Jack |
|
Cable Length |
5.0 ft |
1.52 m |
|
Cable Type |
034 4-cond Shielded |
034 4-cond Shielded |
|
Mounting |
Through Hole |
Through Hole |
|
* All specifications are at room temperature unless otherwise specified
.


Specification Notes
[1] Typical.
[2] Electrical filter is a second order filter.
[3] Amplitude at resonance is +9 dB.
[1] Typical.
[4] Test performed on a shaker at 100Hz
[1] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
Accessories
|
|
|
Supplied |
034G05 |
4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z) |
1 |
100-16040-40 |
|
1 |
100-6774-10 |
|
1 |
100-8994-40 |
|
1 |
ACS-14T |
|
1 |
ACS-22T |
Triaxial amplitude response calibration for shock accelerometer, 100 Hz to upper 1 dB frequency (max 15 kHz) |
1 |