Model: 3503A1160KG

$2,290.00 USD
(Pricing valid in US only)

Datasheet

Triaxial MEMS Shock accelerometer, 60kG, thru hole mount, integral 10-ft silicone cable terminating in pigtails

  • Sensitivity: (±50%) 0.003 mV/g (0.0003 mV/(m/s²))
  • Measurement Range: ±60000 g (±588400 m/s² pk)
  • Frequency Range: (1dB) 0 to 10000
  • Sensing Geometry: Full Active
  • Mounting: Through Holes (2)
  • Weight: 0.1 oz (2.83 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±50 %) (at 10 VDC excitation)0.003 mV/g0.0003 mV/(m/s²)[2] 
Sensitivity0.0003 mV/V/g0.00003 mV/V/(m/s²)[3] 
Measurement Range±60000 g±588400 m/s² pk 
Frequency Range (1 dB)0 to 10000 0 to 10000  
Resonant Frequency≥120 kHz≥120 kHz 
Damping Ratio2 % Critical2 % Critical[1] 
Non-Linearity (per 10,000 g (98,100 m/s²))±1 %±1 % 
Transverse Sensitivity≤3 ≤3  
Environmental
Overload Limit (Shock)±80000 g pk±784532 m/s² pk[5] 
Overload Limit (Mechanical Stops)≥80000 g≥782534 m/s² pk 
Temperature Range (Storage)-65 to 250 °F-54 to 121 °C 
Temperature Range (Operating)-65 to 250 °F-54 to 121 °C 
Temperature Coefficient of Sensitivity-0.11 %/°F-0.20 %/°C[1] 
Zero g Offset Temperature Shift±10 mV±10 mV[4] 
Base Strain Sensitivity0.3 g/µε2.94 (m/s²)/µε[1] 
Electrical
Excitation Voltage (Maximum)15.0 VDC15.0 VDC 
Current Consumption<12 mA<12 mA 
Input Resistance (±700 Ohm)2000 Ohm2000 Ohm[2] 
Output Resistance (±2000 Ohm)6000 Ohm6000 Ohm[2] 
Offset Voltage-40 to +40 mVDC-40 to +40 mVDC[2] 
Settling Time0.01 sec0.01 sec[6] 
Electrical Isolation (Case)≥10000000 Ohm≥10000000 Ohm[7] 
Physical
Sensing ElementPiezoresistive MEMSPiezoresistive MEMS 
Sensing GeometryFull ActiveFull Active 
Housing MaterialTitaniumTitanium 
SealingEpoxyEpoxy 
Size - Height0.25 in6.35 mm 
Size - Length0.47 in11.81 mm 
Size - Width0.47 in11.81 mm 
Weight (without cable)0.1 oz2.83 gm[1] 
Electrical ConnectorIntegral CableIntegral Cable 
Electrical Connection PositionSideSide 
Cable Type8-Cond., shielded, silcone jacket8-Cond., shielded, silcone jacket 
Cable TerminationPigtail EndsPigtail Ends 
Cable Length10 ft3.05 m 
MountingThrough Holes (2)Through Holes (2) 
Mounting Torque6 to 8 in-lb68 to 90 N-cm 

All specifications are at room temperature unless otherwise specified.


CE

Product Notes
[1] Typical.
[2] Verified with test data provided on supplied calibration certificate.
[3] Sensitivity is proportional to excitation voltage, and at other excitation values, sensitivity can be predicted from the 10VDC calibrated value with a small (<~.5%) increase in uncertainty.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] Half-sine pulse duration, >= 20 µsec.
[6] Settling Time is the maximum time after power-up for the Offset Voltage to be within +/-2% of Measurement Range output of the final offset value. Mounting surface must be at thermal equilibrium.
[7] Individually tested to ensure compliance with specified value.
[8] See PCB Declaration of Conformance PS153 for details.
Accessories:
Supplied
081B114Mounting Hardware(1)
ACS-62TShock Pulse Calibration of triaxial piezoresistive shock accelerometer to maximum amplitude of 5k g, 10 VDC excitation(1)
Optional Versions:
No optional versions
Product Documents
Additional Downloads