Model : 3501B1260KG | Piezoresistive Accelerometer

Call for lead time
$ 1,600.00 USD
(Pricing valid in US only!)

MEMS shock accelerometer, 60 kg, 1/4-28 stud mount, 096 integral cable (side exit), length 10-ft pigtails

  • Sensitivity: (±50%)0.003 mV/g (0.0003 mV/(m/s²))
  • Measurement Range: ±60000 g (±588400 m/s² pk)
  • Frequency Range: (1dB)0 to 20000 Hz
  • Sensing Geometry: Full Active
  • Mounting: Integral Stud
  • Weight: 0.088 oz (2.5 gm)
Additional Configurations:
English: SI:
Performance
Sensitivity (±50 %) (at 10 VDC excitation) 0.003 mV/g 0.0003 mV/(m/s²) [2]
Sensitivity 0.0003 mV/V/g 0.00003 mV/V/(m/s²) [3]
Measurement Range ±60000 g ±588400 m/s² pk
Frequency Range (1 dB) 0 to 20000 Hz 0 to 20000 Hz
Resonant Frequency >120 kHz >120 kHz
Damping Ratio 2 % Critical 2 % Critical [1]
Non-Linearity (per 10,000 g (98,100 m/s²)) ≤1 % ≤1 %
Transverse Sensitivity ≤3 % ≤3 %
Environmental
Overload Limit (Shock) ±100000 g pk ±980665 m/s² pk [5]
Overload Limit (Mechanical Stops) ≥80000 g ≥782534 m/s² pk
Temperature Range (Storage) -65 to 250 °F -54 to 121 °C
Temperature Range (Operating) -65 to 250 °F -54 to 121 °C
Temperature Coefficient of Sensitivity -0.11 %/°F -0.20 %/°C [1]
Zero g Offset Temperature Shift ±10 mV ±10 mV [4]
Base Strain Sensitivity 0.3 g/µε 2.94 (m/s²)/µε [1]
Electrical
Excitation Voltage (Maximum) 15.0 VDC 15.0 VDC
Current Consumption <3 mA <3 mA
Input Resistance (±2000 Ohm) 6000 Ohm 6000 Ohm [2]
Output Resistance (±2000 Ohm) 6000 Ohm 6000 Ohm [2]
Offset Voltage -40 to +40 mVDC -40 to +40 mVDC [2]
Settling Time 0.01 sec 0.01 sec [6]
Electrical Isolation (Case) ≥10000000 Ohm ≥10000000 Ohm [7]
Physical
Sensing Element Piezoresistive MEMS Piezoresistive MEMS
Sensing Geometry Full Active Full Active
Housing Material Titanium Titanium
Sealing Epoxy Epoxy
Size - Hex 3/8 in 3/8 in
Size - Height .50 in 12.7 mm
Weight (without cable) 0.088 oz 2.5 gm [1]
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Cable Type 096 4-cond silicone jacket 096 4-cond silicone jacket
Cable Termination Pigtail Ends Pigtail Ends
Cable Length 10 ft 3.05 m
Mounting Integral Stud Integral Stud
Mounting Thread 1/4-28 Male 1/4-28 Male
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Typical.
[2] Verified with test data provided on supplied calibration certificate.
[3] Sensitivity is proportional to excitation voltage, and at other excitation values, sensitivity can be predicted from the 10VDC calibrated value with a small (<~.5%) increase in uncertainty.
[1] Typical.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] Half-sine pulse duration, >= 20 µsec.
[6] Settling Time is the maximum time after power-up for the Offset Voltage to be within +/-2% of Measurement Range output of the final offset value. Mounting surface must be at thermal equilibrium.
[2] Verified with test data provided on supplied calibration certificate.
[7] Individually tested to ensure compliance with specified value.
[1] Typical.
[8] See PCB Declaration of Conformance PS151 for details.


Accessories


Supplied
ACS-62 Calibration of High G PR Accelerometer, 10.0 VDC excitation 1


Optional Versions


( M ) Metric Mount
English SI
Mounting Thread M6 x 0.75 Male