Model : 2301-02A | REACTION TORQUE SENSOR

Click for lead times
Call for lead time on 1-10
Lead Time for 0-0 is 0 Wks
pcb l&t reaction torque transducer, 5,000 in-lb/417 ft-lb  (565 n-m) rated capacity, 50% static overload protection, 4-in (101.6 mm) steel flange
$ 2,360.00 USD
(Pricing valid in US only!)

PCB L&T Reaction Torque Transducer, 5,000 in-lb/417 ft-lb (565 N-m) rated capacity, 50% static overload protection, 4-in (101.6 mm) Steel Flange

  • Measurement Range: 5000 lbf-in ( 565 Nm)
  • Sensitivity: (±15%)2 mV/V ( 2 mV/V)
  • Mounting: Flange (5/16in Bolts) ( Flange (M8 Bolts))
  • Size - Diameter: 4.00 in ( 101.6 mm)
  • Size - Length: 3.00 in ( 76.2 mm)
  • Torsional Stiffness: 1290 klbf-in/radian ( 145.7 kN-m/radian)
English: SI:
Performance
Measurement Range (Full Scale Capacity) 5000 lbf-in 565 Nm [ 1]
Sensitivity (±15 %) (output at rated capacity) 2 mV/V 2 mV/V [ 1] [ 2]
Non-Linearity ≤0.1 % FS ≤0.1 % FS [ 2]
Hysteresis ≤0.1 % FS ≤0.1 % FS [ 2]
Non-Repeatability ≤0.02 % FS ≤0.02 % FS [ 2]
Resonant Frequency 1.8 kHz 1.8 kHz
Maximum Torque 7500 lbf-in 847 Nm
Environmental
Overload Limit (Axial Thrust) 5000 lbf 22.2 kN [ 3]
Overload Limit (Overhung Moment) 2500 lbf-in 282 Nm [ 3]
Overload Limit (Shear) 2500 lbf 11.1 kN [ 3]
Temperature Range (Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0036 %Reading/°C [ 4]
Temperature Effect on Zero Balance (Maximum) ±0.002 %FS/°F ±0.0036 %FS/°C [ 2] [ 4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [ 1]
Excitation Voltage (Recommended) 10 VDC 10 VDC [ 5]
Insulation Resistance 5 GOhm 5 GOhm
Zero Balance ≤1 %RO ≤1 %RO
Output Polarity cw+ cw+
Physical
Size - Diameter 4.00 in 101.6 mm [ 6]
Size - Length 3.00 in 76.2 mm [ 6]
Weight 5 lb 2.268 kg
Mounting Flange (5/16in Bolts) Flange (M8 Bolts)
Torsional Stiffness 1290 klbf-in/radian 145.7 kN-m/radian
Sensing Element Strain Gage Strain Gage
Housing Material Anodized Aluminum Anodized Aluminum
Sensor Material plated steel plated steel
Electrical Connector PT02E-10-6P PT02E-10-6P
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] Nominal.
[ 2] FS - Full Scale.
[ 3] Singularly applied, i.e. no other extraneous loads.
[ 4] Over compensated operating temperature range.
[ 1] Nominal.
[ 5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[ 6] See Drawing 26440 for Complete Dimensions


Accessories


Supplied
181-012A Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. 1