Model : 176A02 | Charge Output Pressure Sensor

Click for lead times
Lead Time for 1-5 is 4 Wks
Lead Time for 6-10 is 5 Wks
$ 4,115.00 USD
(Pricing valid in US only!)

Differential charge output pressure sensor with UHT-12™ element, 6.0 pC/psi, +1200 F, ATEX-CSA approved

This charge output pressure sensor features UHT-12 TM sensing crystal, designed for more accurate, lower noise measurements during large temperature variations.


When using Model EX682A40 differential charge amplifier, also use 045M21B cable.

  • Measurement Range: 725 psi (50 bar)
  • Sensitivity: (+/-20%)6 pC/psi (87 pC/bar)
  • Sensing Element: UHT-12™
  • Temperature Range: -94 to 1200 °F (-70 to 650 °C)
  • Electrical Connector: 7/16-27 2-Pin
  • Weight: 4.6 oz (130 gm)
Additional Configurations:

RELATED PRODUCTS



EX682A40

Intrinsically-safe, DIN mount, differential charge amplifier, 10 mV/pC



Add to Cart for Quote
Add To Cart
English: SI:
Performance
Sensitivity (+/-20 %) 6 pC/psi 87 pC/bar
Measurement Range 725 psi 50 bar
Maximum Pressure (Total) 2000 psi 137.9 bar
Resonant Frequency ≥100 kHz ≥100 kHz
Transverse Resonance >15 kHz >15 kHz
Frequency Response (±5.0 %) 20000 Hz 20000 Hz [1] [2]
Non-Linearity ≤1 % FS ≤1 % FS [3]
Environmental
Acceleration Sensitivity ≤0.0036 psi/g ≤.00025 bar/g
Temperature Range (Continuous) -94 to 1200 °F -70 to 650 °C
Temperature Range (Receptacle) -76 to 500 °F -60 to 260 °C
Temperature Response See Graph See Graph [4]
Hazardous Area Approval See Manual See Manual
Radiation Exposure Limit (Integrated Neutron Flux) 1E10 N/cm² 1E10 N/cm²
Radiation Exposure Limit (Integrated Gamma Flux) 1E8 rad 1E8 rad
Electrical
Output Polarity Differential Differential
Capacitance (with cable pin - pin) 150 pF 150 pF [4]
Internal Resistance (room temp) ≥1000000000000 Ohm ≥1000000000000 Ohm
Insulation Resistance (room temp) ≥1000000000000 Ohm ≥1000000000000 Ohm
Internal Resistance (1200°F/650°C) ≥50000 Ohm ≥50000 Ohm
Insulation Resistance (1200°F/650°C) ≥100000 Ohm ≥100000 Ohm
Physical
Sensing Element UHT-12™ UHT-12™
Sensing Geometry Compression Compression
Housing Material Nickel Alloy Nickel Alloy
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 7/16-27 2-Pin 7/16-27 2-Pin
Cable Type Hardline Hardline
Cable Length 10 ft 3 m
Weight (with cable) 4.6 oz 130 gm [4]
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] Low frequency response is determined by external signal conditioning electronics.
[2] Upper frequency response is calculated from Resonant Frequency.
[3] Zero-based, least-squares line method.
[4] Typical.
[5] See PCB Declaration of Conformance PS058 for details.


Accessories


Supplied
060A59 CLAMP NUT, 20MM HEX, M18x1.5 THREADS 1