Model : 1631-03C | STRAIN GAGE LOAD CELL

Click for lead times
Lead Time for 1-1 is 2 Wks
Lead Time for 0-0 is 0 Wks
$ 463.50 USD
(Pricing valid in US only!)

PCB L&T S-Type Load Cell, 1k lbf rated capacity, 150% of RO static overload protection, 2mV/V output, 1/2-20 UNF threads, integral 10 ft cable w/ open end, aluminum construction

  • Measurement Range: 1000 lb (4448 N)
  • Size - Height: 3.0 in (76.2 mm)
  • Electrical Connector: 10 ft - Integrated Cable
English: SI:
Performance
Measurement Range 1000 lb 4448 N [1]
Sensitivity (±10 %) 2 mV/V 2 mV/V [2]
Non-Linearity ≤0.05 % FS ≤0.05 % FS
Hysteresis ≤0.03 % FS ≤0.03 % FS
Non-Repeatability ≤0.02 %RO ≤0.02 %RO
Creep (in 20 minutes) ≤0.08 % ≤0.08 %
Resonant Frequency 3.2 kHz 3.2 kHz
Environmental
Overload Limit 1500 lb 6672 N
Load Limit (Side Force, FX or FY) 100 lb 445 N [3]
Load Limit (Bending Moment, MX or MY) 200 in-lb 22.6 Nm [3]
Load Limit (Axial Torque, MZ) 200 in-lb 22.6 Nm [3]
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.0005 %Reading/°F ±0.0015 %Reading/°C [4]
Temperature Effect on Zero Balance (Maximum) ±0.0015 %FS/°F ±0.027 %FS/°C [4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [5]
Excitation Voltage (Recommended) 10 VDC 10 VDC [6]
Insulation Resistance >5000000000 Ohm >5000000000 Ohm
Zero Balance ±1 % FS ±1 % FS
Output Polarity +Tension +Tension
Physical
Size - Height 3.0 in 76.2 mm
Size - Width 1.0 in 25.4 mm
Size - Length 2.0 in 51.0 mm [7]
Weight 0.43 lb 195 g
Mounting Thread 1/2-20 Thread No Metric Equivalent
Housing Material Aluminum Aluminum
Sensing Element Strain Gage Strain Gage
Deflection at Full Scale Capacity 0.0025 in 0.05 mm
Electrical Connector 10 ft - Integrated Cable 10 ft - Integrated Cable
Electrical Connection Position Side Side
* All specifications are at room temperature unless otherwise specified
.


Specification Notes


[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 46138 for Complete Dimensions