Model : 1203-12A | LOW PROFILE LOAD CELL

Click for lead times
pcb l&t load cell, low profile, 1000 lbf rated capacity, 50% overload protection, 2mv/v output 5/8-18 unf-2b thread, pto2e-10-6p connector.
Add to Cart for Quote

PCB L&T load cell, low profile, 1000 lbf rated capacity, 50% overload protection, 2mV/V output 5/8-18 UNF-2B thread, PTO2E-10-6P connector.

  • Measurement Range: 1000 lbf ( 4448 N)
  • Size - Diameter: 4.12 in ( 104.6 mm)
  • Size - Height: 2.50 in ( 63.5 mm)
  • Electrical Connector: PT02E-10-6P
English: SI:
Performance
Measurement Range 1000 lbf 4448 N [ 2] [ 4]
Sensitivity (±10 %) (RO) 2.0 mV/V 2.0 mV/V [ 1] [ 3]
Non-Linearity ≤0.04 % FS ≤0.04 % FS [ 2] [ 5]
Hysteresis ≤0.03 % FS ≤0.03 % FS [ 2] [ 5]
Non-Repeatability ≤0.01 %RO ≤0.01 %RO [ 3] [ 5]
Creep (in 20 minutes) 0.025 % 0.025 % [ 5]
Static Error Band ≤0.04 % FS ≤0.04 % FS [ 2] [ 5]
Eccentric Load Sensitivity 0.25 %/in 0.25 %/25.4mm [ 5]
Resonant Frequency 3.5 kHz 3.5 kHz
Side Load Sensitivity 0.25 %/in 0.25 %/25.4mm [ 5]
Environmental
Overload Limit 1500 lbf 6672 N
Load Limit (Side Force, FX or FY) 500 lbf 2224 N [ 6]
Load Limit (Bending Moment, MX or MY) 500 lbf-in 56 Nm [ 6]
Load Limit (Axial Torque, MZ) 500 lbf-in 56 Nm [ 6]
Temperature Range (Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +15 to +115 °F -9 to +46 °C
Temperature Effect on Output (Maximum) ±0.0008 %Reading/°F ±0.0018 %Reading/°C [ 7]
Temperature Effect on Zero Balance (Maximum) ±0.0008 %FS/°F ±0.0018 %FS/°C [ 7]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [ 1]
Excitation Voltage (Recommended) 10 VDC 10 VDC [ 8]
Insulation Resistance >5K GOhm >5K GOhm
Zero Balance ±1 %RO ±1 % FS [ 3]
Output Polarity +Tension +Tension
Physical
Size - Height 2.50 in 63.5 mm [ 9]
Size - Diameter 4.12 in 104.6 mm [ 9]
Weight 6.4 lb 2.9 kg
Mounting Thread 5/8 - 18 UNF-3B No Metric Equivalent
Housing Material Painted Steel Painted Steel
Sensing Element Strain Gage Strain Gage
Mounting Torque 200 lbf-in 23 Nm
Deflection at Full Scale Capacity 0.001 in 0.025 mm
Electrical Connector PT02E-10-6P PT02E-10-6P
* All specifications are at room temperature unless otherwise specified
.




Specification Notes


[ 1] Nominal.
[ 2] FS - Full Scale.
[ 3] RO - Rated Output.
[ 4] Calibrated in tension and compression.
[ 5] Performance specifications guaranteed with factory installed optional Tension Base 084A100
[ 6] Singularly applied, i.e. no other extraneous loads.
[ 7] Over compensated operating temperature range.
[ 1] Nominal.
[ 3] RO - Rated Output.
[ 8] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[ 9] See Outline Drawing 49605 for Complete Dimensions


Accessories


Optional
084A100 Tension Load Base w/ 5/8-18 UNF-3B 1
084A55 Load cell thread pre-tensioner 5/8-18 1
084A90 Connector Protector, 1200 & 1400 Series 1
181-012A Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. 1
8311-01-10A Cable assembly for sensors with PT conn., 10-ft, PT conn. to pigtails, 4-cond. cable 1