Products

load cell, s-type, 500n 5000 ohm m6 x 1 thd

500N S-CELL M6X1 5000 OHM

Model 045000-02501

Add to Quote
  • IP

Load Cell, S-Type, 500N 5000 Ohm M6 x 1 Thd

  • Measurement Range: 112 lb (500 N)
  • Size - Height: 2.50 in (64 mm)
  • Electrical Connector: 6 ft. Integrated Cable

Specification Notes

[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.

English: SI:
Performance
Measurement Range 112 lb 500 N [1]
Sensitivity (±10 %) 2 mV/V 2 mV/V [2]
Non-Linearity ≤0.15 % FS ≤0.15 % FS
Hysteresis ≤0.15 % FS ≤0.15 % FS
Non-Repeatability ≤0.05 %RO ≤0.05 %RO
Creep (in 20 minutes) ≤0.02 % ≤0.02 %
Resonant Frequency 1.8 kHz 1.8 kHz
Environmental
Overload Limit 168 lb 750 N
Load Limit (Side Force, FX or FY) 11.2 lb 50 N [3]
Load Limit (Bending Moment, MX or MY) 22.1 in-lb 2.5 Nm [3]
Load Limit (Axial Torque, MZ) 22.1 in-lb 2.5 Nm [3]
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) +75 to +150 °F +21 to +65 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0036 %Reading/°C [4]
Temperature Effect on Zero Balance (Maximum) ±0.0015 %FS/°F ±0.027 %FS/°C [4]
Electrical
Bridge Resistance 5000 Ohm 5000 Ohm [5]
Excitation Voltage (Recommended) 10 VDC 10 VDC [6]
Insulation Resistance >5000000000 Ohm >5000000000 Ohm
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity + Tension + Tension
Physical
Size - Height 2.50 in 64 mm
Size - Width 0.75 in 19.0 mm
Size - Length 2.00 in 51 mm
Weight 0.24 lb 109 g
Housing Material Aluminum Aluminum
Sensing Element Strain Gage Strain Gage
Deflection at Full Scale Capacity 0.002 in 0.05 mm
Electrical Connector 6 ft. Integrated Cable 6 ft. Integrated Cable
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.