Products

icp® accel., 10 mv/g, 500 g, 2nd order filter, 1 hz to 10 khz response, calibration from 5 hz to upper 5% frequency, overmolded 40 foot hydrotested cable to 500 psi

ACCELEROMETER

Model 352M221

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

ICP® Accel., 10 mV/g, 500 g, 2nd order filter, 1 Hz to 10 kHz response, calibration from 5 Hz to upper 5% frequency, overmolded 40 foot hydrotested cable to 500 psi

Waterproof, pressure tested cable over-molded directly to the sensor
  • Sensitivity: (±15%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4905 m/s² pk)
  • Broadband Resolution: .001 g rms (.01 m/s² rms)
  • Frequency Range: (±5%)1 to 6000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.22 oz (6.3 gm)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] Sensor and Cable hydrotested without connector to 500 psi [3.3 MPa].
[5] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ±500 g pk ±4905 m/s² pk
Frequency Range (±10 %) .5 to 10000 Hz .5 to 10000 Hz
Frequency Range (±5 %) 1 to 6000 Hz 1 to 6000 Hz
Electrical Filter Corner Frequency >15 kHz >15 kHz [2]
Electrical Filter Roll-off 12 dB/octave 12 dB/octave [2]
Resonant Frequency ≥50 kHz ≥50 kHz
Broadband Resolution (1) .001 g rms .01 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 % [3]
Environmental
Overload Limit (Shock) ±7000 g pk ±68670 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 7 to 12 VDC 7 to 12 VDC
Discharge Time Constant 0.4 to 2.5 sec 0.4 to 2.5 sec
Settling Time (within 10% of bias) <10 sec <10 sec
Spectral Noise (1 Hz) 230 µg/√Hz 2256 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 38 µg/√Hz 373 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 19 µg/√Hz 186 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 10 µg/√Hz 98 (µm/sec2)/√Hz [2]
Physical
Size - Height 0.71 in 18 mm
Size - Hex 0.44 in 11.1 mm
Weight (without cable) 0.22 oz 6.3 gm [2]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Electrical Connector Sealed Integral Cable Sealed Integral Cable [4]
Electrical Connection Position Side Side
Cable Termination Pigtail Ends Pigtail Ends
Cable Length 40 ft 12.2 m
Cable Type SB-42275 Twisted Shielded Pair SB-42275 Twisted Shielded Pair
Mounting Thread 10-32 Female 10-32 Female

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
ACS-130 1
ATS-6 Hydro test (sensor/cable pressurized in water environment) 1