single axis mems dc accelerometer, 135 mv/g, 10 g, xx ft integral cable

DC Response Accelerometer

Model 3711F1210G

Single Axis MEMS DC accelerometer, 135 mV/g, 10 g, xx ft integral cable

Sensitivity: (±3%)135 mV/g (13.8 mV/(m/s²))
Measurement Range: ±10 g pk (±98.1 m/s² pk)
Broadband Resolution: 0.3 mg rms (0.003 m/s² rms)
Temperature Range: -65 to +250 °F (-54.0 to +121 °C)
Frequency Range: (±5%)0 to 1000 Hz
Electrical Connector: Integral Cable (Integral Cable)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Measured at 100 Hz, 1 grms.
[2] Typical.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] FSO= Full Scale Output over the Measurement Range
[2] Typical.
[6] Offset tolerance is based on 10 ft of 010 test cable.
[7] See PCB Declaration of Conformance PS027 for details.

	English:	SI:
Performance
Sensitivity (±3 %)	135 mV/g	13.8 mV/(m/s²)	[3]
Measurement Range	±10 g pk	±98.1 m/s² pk
Frequency Range (±5 %)	0 to 1000 Hz	0 to 1000 Hz
Frequency Range (±10 %)	0 to 1500 Hz	0 to 1500 Hz
Resonant Frequency	3.2 kHz	3.2 kHz	[2]
Phase Response (100 Hz)	<10 °	<10 °
Non-Linearity (Typical)	0.3 %	0.3 %	[1]
Non-Linearity (Max)	1 %	1 %	[1]
Broadband Resolution (0.5)	0.3 mg rms	0.003 m/s² rms	[2]
Transverse Sensitivity (Typical)	1 %	1 %
Transverse Sensitivity (Max)	3 %	3 %
Environmental
Overload Limit (Shock)	±5000 g pk	±49050 m/s² pk
Temperature Range (Operating)	-65 to +250 °F	-54.0 to +121 °C
Temperature Range (Storage)	-65 to +250 °F	-54.0 to +121 °C
Temperature Coefficient of Sensitivity	±2.5 %	±2.5 %	[4]
Temperature Coefficient of Sensitivity	±1 %	±1 %	[2] [4]
Zero g Offset Temperature Coefficient	±1 % FSO	±1 % FSO	[2] [4] [5]
Base Strain Sensitivity	0.001 g/µε	0.01 (m/s²)/µε	[2]
Magnetic Sensitivity	40 µg/gauss	3.9 (m/s²)/Tesla	[2]
Electrical
Excitation Voltage	5 to 32 VDC	5 to 32 VDC
Current Consumption	≤5 mA	≤5 mA
Output Impedance	≤120 Ohm	≤120 Ohm
Offset Voltage	±20 mVDC	±20 mVDC	[6]
Spectral Noise (1 Hz)	30 µg/√Hz	294 (µm/s²)/√Hz	[2]
Spectral Noise (10 Hz)	30 µg/√Hz	294 (µm/s²)/√Hz	[2]
Spectral Noise (100 Hz)	30 µg/√Hz	294 (µm/s²)/√Hz	[2]
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Height	0.45 in	11.4 mm
Size - Length	0.85 in	21.6 mm
Size - Width	0.85 in	21.6 mm
Weight (with cable)	2.29 oz	65.0 gm
Electrical Connector	Integral Cable	Integral Cable
Electrical Connection Position	Side	Side
Cable Termination	Pigtail Ends	Pigtail Ends
Cable Type	010 4-cond Shielded	010 4-cond Shielded
Cable Length	10 ft	3.05 m
Mounting	Through Hole	Through Hole

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-172		1
080A152	Easy Mount Clip for Series 3701 and 3711 DC Response Accelerometers	1
081A113	4-40 threaded stainless steel socket head cap screw with stainless steel washer for 3711 Series accelerometers (not off-ground)	2
M081A113	M2.5x0.45 threaded stainless steel socket head cap screw with stainless steel washer for 3711 Series accelerometers (not off-ground)	2