Log In

Log In

Need an Account? Start Here

 
608A11 - Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration
Click to zoom

Model: 608A11

$115.00 USD
(Pricing valid in US only)

Datasheet

Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration

Low-cost industrial accelerometer with integral 10 ft. cable to blunt termination, 100 mV/g, general purpose, submersible, ceramic shear ICP®, 0.5 to 10k Hz, top exit.

  • Sensitivity: (±15%) 100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±50 g (±490 m/s²)
  • Weight: 3.5 oz (99.3 gm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Sensitivity (±15 %)100 mV/g10.2 mV/(m/s²)[1] 
Measurement Range±50 g±490 m/s² 
Frequency Range (±3 dB)30 to 600000 cpm0.5 to 10000 Hz 
Resonant Frequency1320 kcpm22 kHz[2] 
Broadband Resolution (1 to 10000 Hz)350 µg3434 µm/sec2[2] 
Non-Linearity±1 %±1 %[3] 
Transverse Sensitivity≤7 %≤7 % 
Environmental
Overload Limit (Shock)5000 g pk49050 m/s² pk 
Temperature Range-65 to +250 °F-54 to +121 °C 
Temperature ResponseSee Graph %/°FSee Graph %/°F[2] 
Enclosure RatingIP68IP68 
Electrical
Settling Time (within 1% of bias)≤2.0 sec≤2.0 sec 
Discharge Time Constant≥0.3 sec≥0.3 sec 
Excitation Voltage18 to 28 VDC18 to 28 VDC 
Constant Current Excitation2 to 20 mA2 to 20 mA 
Output Impedance<150 Ohm<150 Ohm 
Output Bias Voltage8 to 12 VDC8 to 12 VDC 
Spectral Noise (10 Hz)8 µg/√Hz78.5 (µm/sec2)/√Hz[2] 
Spectral Noise (100 Hz)5 µg/√Hz49.1 (µm/sec2)/√Hz[2] 
Spectral Noise (1 kHz)4 µg/√Hz39.2 (µm/sec2)/√Hz[2] 
Electrical Isolation (Case)>100000000 Ohm>100000000 Ohm 
Physical
Size - Hex9/16 in14 mm 
Size - Height2.5 in64 mm 
Weight (with cable)3.5 oz99.3 gm 
MountingStudStud 
Mounting Thread1/4-28 Female1/4-28 Female[4] 
Mounting Torque2 to 5 ft-lb2.7 to 6.8 Nm 
Sensing ElementCeramicCeramic 
Sensing GeometryShearShear 
Housing MaterialStainless SteelStainless Steel 
SealingMoldedMolded 
Electrical ConnectorMolded Integral CableMolded Integral Cable 
Electrical Connection PositionTopTop 
Cable Length10 ft3 m 
Cable TypePolyurethanePolyurethane[5] 

All specifications are at room temperature unless otherwise specified.


CEceneleccsa_us

Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Typical.
[3] Zero-based, least-squares, straight line method.
[4] 1/4-28 has no equivalent in S.I. units.
[5] Twisted shielded pair.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
Supplied
081A40Mounting Stud(1)
ICS-2NIST-traceable single-point amplitude response calibration at 6000 cpm (100 Hz) for each axis(1)
Optional Versions:
(EX) Hazardous Area Approval- contact factory for specific approvals
 ENGLISHSI
    Hazardous Area ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G
    Hazardous Area ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
    Hazardous Area ApprovalCl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
    Hazardous Area ApprovalCl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
    Hazardous Area ApprovalEx ia IIC T4, AExia IIC, T4
(LB) Low Bias Voltage
 ENGLISHSI
    Output Bias Voltage4.8 to 6.5
    Excitation Voltage12 to 28
    Measurement Range±10 ±98
(M) Metric Mount
 ENGLISHSI
Accessories:
    M081A61Mounting Stud(1)
(TO) Temperature Output
 ENGLISHSI
    Temperature Scale Factor5.56 mV/°F + 32+10 mV/°C
    Electrical Connections (Red)Acceleration Output
    Electrical Connections (Black)Ground
    Temperature Output Range+36 to +250 °F+2 to +121 °C
    Electrical ConnectorMolded Integral Cable
    Electrical Connections (White)Temperature Output
Product Documents
Additional Downloads