Log In

Log In

Need an Account? Start Here


Model: 5302D-01A

$9,963.50 USD
(Pricing valid in US only)

PCB L&T TORKDISC® System, 16-bit telemetry system, 2,000 in-lb/167 ft-lb (226 N-m) rated capacity, 200% static overload protection, 15,000 RPM Max., anodized aluminum

  • Measurement Range: 2000 in-lb (226 Nm)
  • Temperature Range: +32 to +185 °F (0 to +85 °C)
  • Torsional Stiffness: 5800000 in-lb/radian (655312 N-m/radian)
  • Overload Limit: 3300 in-lb (373 Nm)
  • Housing Material: Anodized Aluminum

Add this product to my product comparison
Compare selected models ()

Measurement Range (Full Scale Capacity)2000 in-lb226 Nm 
Accuracy±0.10 % FS±0.10 % FS[3] 
Frequency Range (-3 dB)0 to 8500 Hz0 to 8500 Hz 
Filter Type (High Pass)2-pole Butterworth2-pole Butterworth[5][6] 
Filter Type (Low Pass - Anti Alias)8-pole Elliptical8-pole Elliptical 
Voltage Output (channel A - AC coupled)±10 V±10 V 
Voltage Output (channel B - DC coupled)±10 V±10 V 
Gain (Channel A)1-16 dB1-16 dB 
Gain (Channel B)0.3-1.3 dB0.3-1.3 dB 
Digital OutputQSPIQSPI[4] 
Maximum Load (Axial)500 lb2.2 kN[1][2] 
Maximum Load (Lateral)500 lb2.2 kN[1][2] 
Maximum Moment1500 in-lb169 Nm[1][2] 
Overload Limit (Bolt Joint Slip)3300 in-lb373 Nm[7] 
Overload Limit (Failure)8000 in-lb904 Nm 
Overload Limit (Safe)6000 in-lb678 Nm 
Temperature Range (Operating)+32 to +185 °F0 to +85 °C 
Temperature Range (Compensated)+70 to +170 °F+21 to +77 °C 
Temperature Range (Receiver - Operating)0 to +122 °F-17.7 to 50 °C 
Temperature Effect on Output (within compensated range)0.002 %FS/°F0.0036 %FS/°C 
Temperature Effect on Zero Balance (within compensated range)0.002 %FS/°F0.0036 %FS/°C 
Position Sensitivity (180° rotation of sensor)≤0.1 % FS≤0.1 % FS 
Power Required (50 to 60 Hz)9 to 18 VDC9 to 18 VDC[8] 
Digital Resolution16 Bit16 Bit 
Digital Sample Rate26484 samples/sec26484 samples/sec 
Analog Resolution (based on ±10 V FSO and 16-bit resolution)0.31 mV0.31 mV 
Maximum Speed15000 RPM15000 RPM 
Permissible Axial Float (rotor to stator)0.25 in6.4 mm 
Permissible Radial Float (rotor to stator)0.25 in6.4 mm 
Rotating Inertia (without adaptors)0.056 in-lb/sec20.006 N-m/sec2 
Dynamic Balanceper ISO G 2.5 per ISO G 2.5  
Torsional Stiffness5800000 in-lb/radian655312 N-m/radian 
Torsional Angle (at Full Scale Capacity)0.020 °0.020 ° 
Housing Material (Sensor)Anodized AluminumAnodized Aluminum 
Weight (rotor/sensor)3.5 lb1.6 kg 

All specifications are at room temperature unless otherwise specified.


Product Notes
[1] Extraneous load limits reflect the maximum axial load, lateral load, and bending moment that may be applied singularly without electrical or mechanical damage to the sensor.
[2] Where combined extraneous loads are applied, decrease loads proportionally.
[3] Root sum square of non-linearity, hysteresis, and non repeatability.
[4] Request Technical Note FTQ-STN5 regarding digital output signal.
[5] Selectable High Pass cutoff frequencies of 5, 10, 20, 200 and 500 Hz.
[6] Selectable Low Pass cutoff frequencies of 10,000, 5000, 2500, 1200, 625 and 313 Hz.
[7] Bolt joint slip torque is calculated assuming a coefficient of friction (µ) of 0.1 and that grade 8 socket head cap screws are used and tightened to 30% of yield.
[8] Supplied with universal AC power adaptor.
[9] See PCB Declaration of Conformance PS069 for details.
M0003978Power supply(1)
Optional Versions:
No optional versions