Log In

Log In

Need an Account? Start Here

 

Model: 054218-01184

Add to Cart for Quote

PCB L&T Fastener Force Washer, Metric, M18, 180 kN (40.5 klbf), 5-ft Integral Cable w/pigtails

  • Measurement Range: 40465 lb (180 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 1.62 in (41.1 mm)
  • Size - Height: 0.595 in (15.1 mm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (Full Scale Capacity)40465 lb180 kN[2] 
Sensitivity (output at rated capacity)1.50 mV/V1.50 mV/V[1][2] 
Non-Linearity±5 % FS±5 % FS[1] 
Hysteresis±5 % FS±5 % FS[1] 
Non-Repeatability±2 % FS±2 % FS[1] 
Resonant Frequency10 kHz10 kHz 
Environmental
Overload Limit60698 lb270 kN 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)N/A N/A  
Temperature Effect on Output (Maximum)±0.02 %Reading/°F±0.036 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.02 %FS/°F±0.036 %FS/°C[1] 
Electrical
Bridge Resistance350 Ohm350 Ohm[2] 
Excitation Voltage (Recommended)10 VDC10 VDC[4] 
Output Polarity (Compression)PositivePositive 
Physical
Size - Height0.595 in15.1 mm 
Size - Diameter1.62 in41.1 mm 
Fastener Size0.709 in18 mm 
Through Hole Diameter0.715 in18.16 mm 
Sensing ElementStrain GageStrain Gage 
Electrical Connectorpigtail endspigtail ends 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] FS - Full Scale.
[2] Nominal.
[3] Over compensated operating temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
Accessories:
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads