Log In

Log In

Need an Account? Start Here

 

Model: 054124-01104

Add to Cart for Quote

PCB L&T Fastener Force Washer, English, 2-in, 100 klbf (444.8 kN), 5-ft Integral Cable w/pigtails

  • Measurement Range: 100000 lb (444.82 kN)
  • Sensitivity: 0.9 mV/V
  • Size - Diameter: 3.73 in (94.742 mm)
  • Size - Height: 0.938 in (23.8252 mm)

Add this product to my product comparison
Compare selected models ()

 English:SI: 
Performance
Measurement Range (Full Scale Capacity)100000 lb444.82 kN[2] 
Sensitivity (output at rated capacity)0.9 mV/V0.9 mV/V[1][2] 
Non-Linearity±10 % FS±10 % FS[1] 
Hysteresis±10 % FS±10 % FS[1] 
Non-Repeatability±2 % FS±2 % FS[1] 
Resonant Frequency10 kHz10 kHz 
Environmental
Overload Limit150000 lb667.23 kN 
Temperature Range (Operating)0 to +200 °F-18 to +93 °C 
Temperature Range (Compensated)N/A N/A  
Temperature Effect on Output (Maximum)±0.02 %Reading/°F±0.036 %Reading/°C[3] 
Temperature Effect on Zero Balance (Maximum)±0.02 %FS/°F±0.036 %FS/°C[1] 
Electrical
Bridge Resistance350 Ohm350 Ohm[2] 
Excitation Voltage (Recommended)10 VDC10 VDC[4] 
Physical
Size - Height0.938 in23.8252 mm 
Size - Diameter3.73 in94.742 mm 
Fastener Size2.00 in50.8 mm 
Through Hole Diameter2.047 in51.9 mm 
Sensing ElementStrain GageStrain Gage 
Electrical Connectorpigtail endspigtail ends 
Electrical Connection PositionSideSide 

All specifications are at room temperature unless otherwise specified.



Product Notes
[1] FS - Full Scale.
[2] Nominal.
[3] Over compensated operating temperature range.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
Accessories:
No Accessories
Optional Versions:
No optional versions
Product Documents
Additional Downloads